| 3 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 3 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 3 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 3 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Xplorer4 anemometro |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Hovercraft sailcloth |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Joint with bearing M2 22x5,5 |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Motor OS 3820-1200 electric |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | PROFI Box JETI |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Adapter 3,0 mm M8 |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Ferrita 17x10x6.5 mm |
| 2 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | 80 mm rods set for direction control |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Wing conexion 2 servos Futaba 50 cm |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | XT-60 connector (male) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 2 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | FesEx-Uni6 System |
| 1 x | FesEx-Uni8 System |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 2 x | Balsa panel 10x100x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Jeti Advance Plus Program Card |
| 1 x | JetiBOX |
| 1 x | Tarjeta programadora RAY G2 |
| 1 x | ProgBOX MASTER Hacker |
| 1 x | Jeti Box mini |
| 1 x | Jeti Advance Pro Program Card |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Nut for mounting M3 (4 pcs) |
| 1 x | Hexagonal Nut M2 (10 pcs) |
| 1 x | Hexagonal Nut M1 (10 pcs) |
| 1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Nut for mounting M6 (4 pcs) |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Hexagonal Nut M3 (10 pcs) |
| 1 x | Threaded insert M6 (10 pcs) |
| 1 x | Nut for mounting M4 (4 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Nut for mounting M2,5 (4 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
| 1 x | Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Ferrita 27x14x7 mm |
| 2 x | Ferrita con funda |
| 1 x | Suncover 100cc Red |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace) |
| 1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
| 1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
| 1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
| 1 x | Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
| 1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
| 1 x | |
| 1 x | OSD Telemetry sensor |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
 |
| 5,370.52EUR |
