| 1 x | Cap Hispano Aviación |
| 2 x | Motor DLE 200cc Std |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | DLE Ignition 111/120/170 |
| 2 x | Big Crow DLE-170M |
| 1 x | Oracover Green10 m |
| 1 x | Tray JETI for DS-14/16/24 Black |
| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Metalic nose for PROJETI |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 4 x | Cooler motor type 400 |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 2 x | Motor DLE 430 cc - Paramotors |
| 2 x | Fox MDM 1 6000 mm |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 3 x | |
| 1 x | Life guard Ø 17,0 mm (10 pcs) |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | Adjustable brass horn threaded M3 |
| 1 x | Crystal Universal RX 35.070 Ch 67 |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 2 x | Elevator VENTUS 2cx 4.5m |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 2 x | LO 100 ARC 3.3m,cabina |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 3 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | Neck strap JETI DS |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 6 x | Swift S1 De-luxe 3.730 mm |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | T-shape holder metal LAMA |
| 1 x | LO 100 ARC 3.3m |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 2 x | Motor mount VANQUIST 48" F3A |
| 2 x | Swashplate metal LAMA |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Shaft sleeve LAMA |
| 5 x | SOLOFOX 5m Voll-GfK |
| 1 x | 12 mm floating pad (49 pcs) |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | Mini-Pix Esc 15 Amp |
| 1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
| 1 x | ASW 20 5000 mm with winglets (Airwold) |
| 2 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
| 2 x | Fox MDM 1 4000 mm DeLuxe |
| 5 x | Fox 4000 mm (Airwold) |
| 2 x | LS-8 GFK 6m Glider |
| 3 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
| 1 x | Ventus 2cx 4.5 m de Luxe |
| 5 x | Fox MDM 1 4000 mm DeLuxe,cabina |
| 3 x | Set of buckles and strap, 1:4 scale. |
| 1 x | Swift S1 De-luxe 3.140 mm |
| 1 x | Ventus 2cx 4.5 m |
| 1 x | Fox MDM 1 4000 mm Std. |
| 1 x | Swift 5050 mm (Airwold) |
| 1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
| 2 x | DG-303 ACRO 3750 mm (Airworld) |
| 3 x | LUNAK 4,00 m |
| 2 x | Fox 4000 mm with flaps (Airwold) |
| 2 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
| 2 x | SAGITA Alsema 4.0 m |
| 2 x | DG-303 ACRO 3750 mm, canopy |
| 1 x | Ventus 2cx 4.5 m Winglets |
| 1 x | Fournier RF-4D |
| 5 x | LO 100 ARC 3.3m,frame canopy |
| 1 x | ASK 21 6.8m |
| 2 x | Ion Pro, Fuselage (JP Model) |
| 1 x | FESTO connector M7 Quick 4 mm |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Fascination 3600 mm (Top Model) |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | Spring clamp for tube Ø50 mm |
| 1 x | Head core |
| 2 x | Strip ABS 2.0x8.0x1000 mm |
| 2 x | Gobe R-26S (Airwold) |
| 5 x | ASK 21 6.5m + pylona |
| 3 x | DG-303 ACRO 3750 mm, winglets |
| 4 x | Kobuz 5000 mm (Airwold) |
| 2 x | SHK 4000 mm Scale 1:4.25 |
| 7 x | ASW 15 5000 mm (Airwold) |
| 2 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 2 x | 100 mm rods set for direction control |
| 2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Dean-T Plug Mold |
| 2 x | Strip 3,5x1,75x330 mm |
| 2 x | Crystal Universal RX 35.040 Ch 64 |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Carbon blade 230 mm |
| 2 x | ABS tube 7.0x5.0x1000 mm |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Life guard Ø 35,0 mm white/red (2 pcs) |
| 2 x | 20 mm carbon horn |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 2 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Spray Graphit 33 |
| 3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Head lower part New |
| 2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 2 x | Micro Crystal RX 35.890 Ch 189 |
| 2 x | Motor mount EDGE 540 48" |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Servo FUTABA BLS 276SV |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 2 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Anchor 50 mm (2 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Spring Clip Ø25 mm |
| 2 x | 90 mm rods + T patellas set for direction control |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
| 1 x | Mini VISION "spread tow" CFK |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 2 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Cut tube |
| 1 x | Ball Link Plier |
| 1 x | Micro Crystal RX 35.100 Ch 70 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Allen wheel collar M3x3 |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Bags BULL Mo1 2.6m "Luxe" |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Dremel 3000 130W |
| 1 x | Coupling bush 5 - 5 mm |
| 1 x | BABY glider drawings (Aero-naut) |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | 270 mm 3/3 mm shaft ship |
| 2 x | Radial heatsink for MPJ AC25/35-xx motor |
| 2 x | 80 mm rods set for direction control |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Ferrita con funda |
| 1 x | KIRA 400-34 |
| 4 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Xplorer4 anemometro |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Ion Pro, Canopy (JP Model) |
| 2 x | X-RAY Micro QR (Elevator) |
| 1 x | Railing Ø 2mm (20 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | TMM 2512-3S heli |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Stickers-digit for marking |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 2 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | PYRO 700-56L |
| 1 x | Pan Head Screw M2x8 PH countersunk head |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | 30E class, Spare wing joinner (SebART) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | DIVA cabin cruiser |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Micro clevis 0.8 mm(10 uds) |
| 1 x | Hinges 7x12 mm (20 pcs) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | CESSNA 50E White/Blue |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | BIELA 25x10 WILGA Propellers |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | TAKEO 3.6m |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 2 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Astra (Top Model) |
| 1 x | ODYSSEY Yellow, Rudder |
| 2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
| 2 x | Motor Typhoon 6/20 |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | AngelS 50E White cockpit(SebART) |
| 1 x | Avanti S Jet , Carrying bags (SebArt) |
| 2 x | Horn mando small (2 pcs) |
| 1 x | PC-21 PILATUS Electric retract system |
| 1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
| 1 x | VAGABOND 1500 mm ARF V2 (Blue) |
| 1 x | Crystal Universal RX 35.030 Ch 63 |
| 1 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
| 1 x | SPITFIRE Mk-IX 81" (2058 mm) |
| 1 x | 33,0 mm propeller (left propeller) |
| 1 x | 25 mm Sandpaper file |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | ODYSSEY Horns Set GFK |
| 2 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Motor DA 100L |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | FunCup XL RR |
| 1 x | Cooler motor type 300 |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | Micro Crystal RX 35.080 Ch 68 |
| 2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 2 x | Medium pin type hinge (12 uds) |
| 1 x | "S" set for boats |
| 1 x | LA500 Autogyro |
| 1 x | Servo FUTABA BLS 272SV |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Sparkplug NGK CM6 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Frontal support Speed 600 |
| 2 x | FA27.2×8.9 Prop-2PCS/PAIR |
| 1 x | Racor 4/3 mm |
| 1 x | AngelS 50E White/Green Fuselage(SebART) |
| 2 x | P-47
Electric Landing gear complet (CY model), |
| 1 x | Lock nut aluminium M2 (4 pcs) |
| 1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Receiver DUPLEX REX 3 2.4 GHz |
| 1 x | Cable control set |
| 1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Rotorshape Elevator |
| 1 x | Pulley 8x13 mm (5 pcs) |
| 2 x | 28 mm tailwheel unit |
| 2 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | TMM 1210-3S heli |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | Long pinned hinge (6 uds) |
| 2 x | Round Rod 1,25x1000 mm |
| 1 x | DA 70 Twin Gas Engine |
| 1 x | Head lower part |
| 2 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Sparkplug Champion RCJ-7Y for ZG |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | Canopy Latch |
| 1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
| 1 x | Frontal support Speed 280 |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | P-47 Struts + Wheels (CY model) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Servo Mount M (blue) |
| 1 x | Racor 3/3 mm |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 2 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Cierva C30 simulated motor |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | Sebart 50E YELLOW/BLACK (SebART) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Servo HITEC HS-5085 MG Digi |
| 1 x | |
| 1 x | Anchor of tow Met. 60 mm |
| 3 x | Cooler motor type 280 |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | Tyres 70 mm Xclaibur (2 pcs) |
| 2 x | Crystal TX 35.050 Ch 65 |
| 1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | EC-Cutter |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | La Capitania di Venetia accesories |
| 2 x | Anchor 25 mm (2 uds) |
| 1 x | Fishing boat Jule Fischkutter |
| 1 x | LA500 pre-rotation gear |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 3 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | PYRO 700-45 |
| 1 x | Exhaust gasket Valach 85 |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Antenna 50 mm (2 uds) |
| 2 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 2 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | PYRO 700-45 Long Axi |
| 1 x | E-FUN BUG (ROI-Import) |
| 1 x | Sparkplug 1/4-32 Glow |
| 1 x | KIRA 600-20 |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | P-47B Razorback WA7 2.440 mm (CY model) |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | Anchor 80 mm (2 uds) |
| 2 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Sub-D Plug Mold |
| 1 x | Canopy Sweet / Siesta |
| 1 x | Sparkplug DLE CM6 |
| 1 x | Spinner fold propeller 36 mm (white spare spinner) |
| 1 x | 3,2 mm Prop Adapter M8 |
| 2 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
| 1 x | AngelS 50E White landing gear(SebART) |
| 2 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | DUPLEX R7 receiver REX Assist |
| 1 x | PowerBox Smokepump |
| 1 x | AXI 2820/8 V2 |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Festo 6mm Tubing Holder (10 uds) |
| 2 x | Horns indoor |
| 1 x | Raer wall |
| 1 x | Skyhawk (RBC Kits) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | BIELA 19x7 WILGA Propellers |
| 1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
| 1 x | Battery LiFe -2100/25C-3S 9.9V |
| 1 x | Offshore-Schleppwinde Bs |
| 1 x | Crystal RX 35.120 Ch 72 |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Mitsubishi ZERO AM6 91 ARTF |
| 1 x | A/C quality beech plywood 498x247x1.2 mm |
| 1 x | Spray EC Red 400ml |
| 2 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | 6 mm M3 variable inclined horn |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Pilot Lotsenboot |
| 1 x | Spinner red 36-38 mm |
| 2 x | Xoar Electric Beechwood Prop 22x10 |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Roller cutter 28 mm |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Servo HITEC HS-55 |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | KIRA 400-39 5,2:1 |
| 1 x | Sparkplug ROSSI R8 |
| 3 x | Motor holder for AC 28/7 |
| 1 x | 40 mm white plastic spinner for fixed propeller |
| 1 x | Frontal Adapter for AXI53xx |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Soporte metal para servos |
| 1 x | Hose stopper 4 mm |
| 1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
| 1 x | Antiaircraft gun 3.7 cm (5 pcs) |
| 1 x | Hand Pads for Tray JETI |
| 1 x | Boat 140 mm |
| 1 x | Blade holder lower |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | |
| 1 x | Feedthroughs 4 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Long ball link M1.6 (6 uds) |
| 2 x | SIMtransmitter 6 Mode 2 |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Chili F3K 2 wing servo mounted |
| 1 x | Piston ring for DLE-30 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Blue Aluminium lock nut M4 (4 pcs) |
| 1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
| 1 x | Electric Landing Gear ODYSSEY |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | FesEx-Uni6 System |
| 1 x | DUPLEX 2.4GHz GPS |
| 1 x | Refueling Cup V2 Red |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Reed valve petal for DLE 120 |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Servo HITEC HS-5475 HB Digi |
| 1 x | 27x10 prop Super Silence |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Prop Shaft Adapter 8 mm/M12 "long" |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Neck strap JETI DC |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | DINO Glider ARC |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Cable with accesories |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Receiver DUPLEX R5L EX 2.4 GHz |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Turbine KingTech K30G Restart |
| 1 x | Prop washer for DA-85, DA-100, DA-100L, DA-120 |
| 1 x | Crystal RX 35.050 Ch 65 |
| 1 x | Round Rod 1,5x1000 mm |
| 3 x | 800TVL CMOS camera for FPV |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | Motor MVVS 5.6/690 GLIDER |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | Program 5v SIO RS 232 |
| 1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 2 x | Servo Bolt M3x8 (8 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
| 1 x | Hawker Hunter (RBC Kits) |
| 1 x | Nut for mounting M2,5 (4 pcs) |
| 1 x | Racor "Y" 3 mm |
| 2 x | Crystal RX 35.250 Ch 285 |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Muffler DLE 20 |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 2 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Ion Pro, Elevator (JP Model) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 2 x | Crystal Universal RX 35.090 Ch 69 |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Refueling Cup V2 Blue |
| 1 x | Motor mount M |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | Connectors MPX male |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | AXI 2826/8 V2 Long |
| 1 x | ACTIVE ARF Electric 1.995 mm |
| 2 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Sparkplug 1/4-32 |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | PropCover 16-20" (1 pcs) |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | DUPLEX R6 receiver REX Assist |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Cockpit aluminium closing |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Gasket set DLE-120 |
| 1 x | Micro Crystal RX 35.140 Ch 74 |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 2 x | Y-Hose connector 3-3-3 mm |
| 1 x | Electric Fuel Pump 12V |
| 1 x | Ventus 2cx 4.5 m Bag canopy |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | AXI 2814/16 V2 Long |
| 1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Ion Pro, Wing joiner (JP Model) |
| 1 x | PARTENAVIA 2020 mm ARF with Flaps |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Servo HS-5765MH High Voltage |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | FESTO connector M5 Quick 4 mm |
| 1 x | Spannlack 1000 ml |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Gasket set DLE-30 |
| 1 x | Hexagonal Nut M4 (10 pcs) |
| 1 x | Central piece 52 mm + 2,5º |
| 1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
| 1 x | 45 mm black plastic spinner for fixed propeller |
| 1 x | Micro Crystal RX 35.170 Ch 77 |
| 1 x | EXTRA 300 78" V3 Orange/Blue |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Micro Crystal RX 35.090 Ch 69 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Propeller 3BL 50 mm M4 Plastic |
| 1 x | Servo Bolt M3x6 (8 pcs) |
| 1 x | AXI 2826/12 V2 |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
| 1 x | Propeller Pleg CAM Carbon 20x12 |
| 1 x | 42 mm central piece for 4 blades |
| 1 x | LA500 Blades |
| 2 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Mini Avanti S 1.4m white/red |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | Power Box GPS Sensor III |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
| 1 x | AXI 2820/10 V2 |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
| 1 x | Lock nut M2 (10 pcs) |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | 75 mm |
| 1 x | Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller) |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Rotorshape Autogyro |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Blade holder upper |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | F-104 Starfighter USAF (SebArt) |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Nut M2 |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | Altimeter Altis NAO |
| 1 x | Kerostarter K30G |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | BlueCom™ Adapter (iOS) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Propeller RABOESCH M4 65 mm (4 Blades) (Right hydropropeller) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Propeller set 400 (2R+2L) |
| 1 x | Dust collector for mould cleaning |
| 1 x | ASPIRE Red ARF 2.000 mm |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | 50 class GLOW conversion set (SebART) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | MythoS 140 gold wheel pants(SebART) |
| 1 x | Electric Fuel pump |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | LA-7 Lavochkin 2314 mm (CY model), Wheels and le |
| 1 x | Propeller AERO-NAUT M4 70 mm (6 Blades pr) (Right hydropropeller |
| 1 x | Size "M" motor holder for class 600 |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Radar 56 mm |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | 9x7 tree blades propeller |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | XCALIBUR Fuel Tank with built in UAT |
| 1 x | Miss Wind 50E White landing gear(SebART) |
| 1 x | 36 mm red plastic spinner for fixed propeller |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
 |
| 176,442.39EUR |
