| 1 x | Glases Nimbus |
| 1 x | Glases Nimbus "Black" |
| 1 x | Bungee HLG Premium |
| 2 x | Glases Innovation Plus |
| 2 x | Glases Moritz |
| 1 x | Glases Flitemaster |
| 1 x | Motor A2212/13T |
| 1 x | Interface Jack Adapter IKARUS |
| 2 x | 3-Blade Spinner 70 x 70 mm GFK |
| 2 x | Spinner 159x200 mm GFK |
| 1 x | Spinner 90 mm GFK |
| 1 x | Spinner PC-21 JMB-Jets red 3 blade |
| 2 x | Fiberglass spinner Ø125mm fixed by a central screw |
| 1 x | Spinner 100 mm GFK |
| 1 x | 3-Blade Spinner 85 x 80 mm GFK |
| 1 x | Spinner 80 mm GFK |
| 2 x | Spinner 140 mm GFK |
| 2 x | Spinner 90 mm CFK |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 3 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Xplorer2 anemometro |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Glases Ace |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
| 2 x | Support Pitot JETI |
| 1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 2 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
| 1 x | Prop rubber XS set 4 pieces |
| 2 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
| 1 x | Spinner 110 mm GFK |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
| 2 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
| 1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
| 2 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 2 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Spare screw M3 6pcs. |
| 2 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 3 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 2 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
| 1 x | Spinner 115 mm GFK |
| 1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 2 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Compact on-board starting system (9713) |
| 1 x | GLOW 5C + accesories |
| 2 x | RCEXL Electronic ignition twin A-02 |
| 1 x | GLOW 2C + accesories |
| 1 x | DYMOND VTX UBS Programming adapter |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | PBS TJ 40-G1 Turbine |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Support Filtro FESTO |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Angle support XT60 conector |
| 1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
| 1 x | ULTIMATUM 2.0 m green/black |
| 1 x | Interface Realflight Simulator |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
| 1 x | Emisora FUTABA T18 SZ + R7208SB |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
| 1 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 1 x | Futaba T3PV T-FHSS |
| 1 x | Selfstarr EME35 |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
| 1 x | Maleta transporte FUTABA 10PX |
| 1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
| 1 x | Compact on-board starting system (9715) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | DLE Ignition unit |
| 1 x | Futaba Prop Module F14 |
| 1 x | DLE 30 complete electronic ignition |
| 1 x | Recess mount-rem. glow plug set |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
| 1 x | Switch moment button, 2 functions, long FUTABA |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Futaba S9650/9670SV - Upper Case |
| 1 x | AIRSPEED SENSOR SBS01TAS |
| 1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
| 1 x | Compact on-board starting system (9724) |
| 1 x | Ant. Cable R606/17/08/14FS L:1500mm |
| 1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Pushrod octagone 4/3 |
 |
| 38,553.55EUR |
