| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita con funda |
| 2 x | SUS wire 3m (nylon coated) |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 3 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | One touch canopy lock |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Covered closure or fairings |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 2 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 01 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | USB Mini Camera endoscope |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 30 cm BEC cable (male) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | TrainerCord (master-learner) |
| 2 x | 2 LiPo XH>EH adapter |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 3 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Premium servo extension 25cm |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 2 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Circlick securite |
| 3 x | Futaba Female 40 cm extension |
| 2 x | Prolongador S-Bus JR/JR 10cm |
| 3 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 2 x | Extension 90 cm (Futaba) |
| 2 x | Cabel "Y" 30 cm (Futaba) |
| 3 x | 200 mm extensión servo HITEC/JR |
| 1 x | Extension silicon 100 cm (Graupner) |
| 2 x | Futaba Female 40 cm extension |
| 2 x | Extension 30 cm (Futaba) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 2 x | Extension lead 15 cm Multiplex |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Smoke set "Glider" |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 2 x | Universal batery Tester |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 2 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Cockpit metalic closing |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Snap short M2 (10 uds) |
| 2 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Screw-lock connector M2 (2 uds) |
| 2 x | Extension 7.5 cm |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | Switching module high voltage SXH |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | 800TVL CMOS camera for FPV |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Connector CAN 15 |
| 1 x | CC 05 |
| 1 x | PSC 6 |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | USB HLS prog. interface |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Futaba male 40 cm extension |
| 2 x | Extension silicon 10 cm (Graupner) |
| 2 x | Extension silicon 50 cm (Futaba) |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | 1000 ccm gasoline fuel tank |
| 1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
| 1 x | 29x12 prop Super Silence |
| 1 x | 3-blades 28x12 carbon prop Super Silence |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 28x12 prop Super Silence |
| 1 x | 3-blades 16x10 carbon prop Super Silence |
| 1 x | 25 mm carbon servo arm |
| 1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
| 1 x | |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | 22x10 prop Super Silence |
| 1 x | 500 ccm gasoline fuel tank |
| 1 x | 30x14 prop Super Silence |
| 1 x | 27x10 prop Super Silence |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | 3-blades 30x12 carbon prop Super Silence |
| 1 x | 24x14 prop Super Silence |
| 1 x | 3-blades 20x12 carbon prop Super Silence |
| 1 x | |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | 1000 ccm complete gasoline fuel tank |
| 1 x | 3-blades 29x12 carbon prop Super Silence |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | 3-blades 24x12 carbon prop Super Silence |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | |
| 1 x | 3-blades 21x12carbon prop Super Silence |
| 1 x | 3-blades 27x12 carbon prop Super Silence |
| 1 x | Lipo FOXY G3 4500 mAh 11.1v 40/80C |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | "Taxi Tank" Fuel Tank |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | 20x200 mm battery rings |
| 1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | 1/6 Pilot "John" |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | 102 mm aluminium spinner |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | 18m Fitting barb |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
 |
| 5,643.54EUR |
