| 1 x | Extractor piñones 2.3/3.2 mm |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 3 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Optical RPM Sensor |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | 20 g tin paste |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Fixed launching hook |
| 2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Spray EC Red 400ml |
| 1 x | LOWER TOW HOOK |
| 1 x | USB Mini Camera endoscope |
| 1 x | Towing hook <3m |
| 1 x | Release wax 250ml |
| 1 x | Partall paste 650 g |
| 2 x | Towing hook |
| 2 x | Spray YELLOW Inca Lexan 150ml |
| 2 x | SERVO HOLDER |
| 2 x | Universal Colour Paste deep black 250 g |
| 2 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | Tow hook for tug |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | Universal Colour Paste deep black 50 g |
| 2 x | Painting GHT Lexan Black 150 ml |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | EC-Cutter |
| 1 x | Parachute P4 |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | 100 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | 80 mm rods set for direction control |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Paint gun for sprays |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Switch Cap L (black) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 2 x | 1000 ml sealer (DOPE) |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | Adjustable launching hook |
| 1 x | Maleta transporte FUTABA 10PX |
| 1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
| 2 x | Spray Graphit 33 |
| 1 x | Neck strap Double V2 |
| 1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
| 1 x | Nitroverdu 500 ml |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 3 x | Spray adhesive AEROFIX 2 |
| 1 x | Adap/Exten for Futaba 12-14C |
| 1 x | SWTU2 switch |
| 1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
| 1 x | Switch Cap L (silver) |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | UHU Por 50ml/40g |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Hacker A30-S Radial Set |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 1 x | Central support Speed 600 |
| 1 x | Motor A60-5XS V4 28-pole kv420 |
| 1 x | Shaft for A60-20/22/24S (120 mm) |
| 1 x | Motor A40-14 L 14-Pole V4 |
| 1 x | Frontal support Speed 280 |
| 1 x | Motor A30-14 L V4 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | PHASOR RACE 2035/4100 1D |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | Motor A30-10 XL V4 |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | Cooler motor type 300 |
| 1 x | Motor A60-7XS V4 28-pole kv330 |
| 1 x | Motor A30-12 L V4 |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | Axle for motor A50-L |
| 1 x | Motor A20-20 L EVO |
| 1 x | Motor A200-8 |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Motor mount for 1 m models |
| 1 x | Shaft for A60-L (140mm) |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Frontal support Speed 600 |
| 1 x | Motor A30-12 XL Glider |
| 1 x | 10 mm gas motor standoff |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Motor mount M |
| 1 x | Size "L" motor holder for class 600 |
| 1 x | Motor mount for 1200 mm models |
| 1 x | Motor A30-14 M V2 6 Poles |
| 1 x | Motor A50-12 L Glider |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | Fan for A60 |
| 1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | Motor A50-12 L V4 |
| 1 x | Motor B20-10 L + 4:1 gearbox |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | Cooler motor type 150 |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Cooler motor type 280 |
| 1 x | Motor A200-6 |
| 1 x | Motor A50-14L Turnado V3 Glider |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
 |
| 8,720.56EUR |
