1 x | CC 05 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Circlick securite |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 5 LiPo XH>EH adapter |
1 x | CM-3 |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger transmitter GRAUPNER |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabling for Fox MDM1 wings |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Connector CAN 15 |
1 x | 30 cm BEC cable (female) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Connector Sub-D 2+5 Female |
1 x | Connector Sub-D 2+5 Male |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | CC 01 |
1 x | 2 LiPo XH>EH adapter |
1 x | UBEC 6A KAVAN |
2 x | Yellow smoke canister 65 g |
1 x | B4-0 rocket charges (6 pcs) |
2 x | "S" set for planes |
2 x | White smoke canister 140 g |
1 x | Blue smoke canister 140 g |
1 x | Initior Receiver FRX2 Wireless |
2 x | White smoke canister 100 g |
1 x | "M" set |
2 x | Red smoke canister 100 g |
1 x | Smoke set "M" |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Smoke set "S" |
2 x | Electric rocket starters (6 pcs) |
2 x | Ventral support for AX-18/AX-60 |
1 x | Yellow smoke canister 100 g |
1 x | "S" set for boats |
1 x | White smoke canister 65 g |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Hot Glue Stick RED |
1 x | 1/7 Pilot "Japanese" |
1 x | Horn for flap control (1 pcs) |
1 x | CC 02 |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | USBCOM 5i |
2 x | PCARD Wireless System |
1 x | 3l Smoke oil |
2 x | White smoke bombs AX-18 (5 pcs) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Green smoke canister 100 g |
1 x | Green smoke canister 140 g |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Optotronix Aurora Plug |
1 x | EWC6 40 cm wing connector |
1 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Blind nut M6 (4 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | 20 mm gas motor standoff |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Magnetic Connect locking system |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | MPX-Dean "T" Adapter |
1 x | Extension for SensorSwitch 60cm |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | M3 black washers (4 pcs) |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M4x6 |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Allen wheel collar M3x5 |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 140 mm rods set for direction control |
2 x | 80 mm rods set for direction control |
2 x | 28x5 mm wires output (2 pcs) |
2 x | Clip fixing for wing (2 pcs) |
2 x | Allen wheel collar M4x4 |
3 x | 90 mm rods + T patellas set for direction control |
2 x | 100 mm rods set for direction control |
2 x | 11 mm Rubber pads (14 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | 41x5,5 mm wires output (2 pcs) |
2 x | Canopy Latch |
3 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | Parachute expulsion foam |
1 x | Rocket D9-7 |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Blue smoke canister 100 g |
1 x | Red smoke canister 140 g |
2 x | AX-60 starters (5 pcs) |
1 x | USB Interface Adapter |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Wire easy tensioner (silver) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | wire tensioner (blue) |
1 x | wire tensioner (black) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Oratex Natural White 2m |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Small kwik link (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | wire tensioner (red) |
1 x | wire tensioner (silver) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Oracover light Grey 2m |
1 x | Oracover Black 10 m |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Soporte servo KST X08/H and Plus |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Xplorer4 anemometro |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Screw M2x6 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Pan head screw M2x16 PH |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cockpit plastic closing |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Cockpit metalic closing |
1 x | Snap long M2 (10 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Screw M2.5x8 (10 pcs) |
2 x | 45 mm rods set for direction control |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Xplorer2 anemometro |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Snap short M2 (10 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod octagone 3/2 |
1 x | Screw M3x8(10 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Pushrod octagone 4/3 |
1 x | Screw M4x20 (10 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Covered closure or fairings |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Screw M3x12 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Screw M4x30 (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Cable tie mounts 4.3 (4 uds) |
|
4,590.43EUR |