| 3 x | Canopy Sweet / Siesta |
| 3 x | Bidule 111 3000 mm Canopy |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 3 x | 30 mm Alu spinner 3 mm pleg. propeller |
| 3 x | Avia spare blue cockpit (Top Model) |
| 3 x | Bidule 55 V3 2460 mm |
| 2 x | 13 mm wing servo holder |
| 3 x | Albatros red/white (Top Model) |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | BULLIT Wing 840 mm |
| 2 x | Angle measurer |
| 2 x | 18 mm wing servo holder |
| 1 x | 34 mm Alu spinner 4 mm pleg. propeller |
| 1 x | ACTIVE ARF Electric 1.995 mm |
| 2 x | Angle of incidence meter |
| 3 x | Canopy Astra |
| 2 x | Albatros ,spare cockpit (Top Model) |
| 2 x | 58 mm micro servo cover |
| 3 x | 57 mm micro-mini servo cover |
| 2 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
| 2 x | 65 mm mini servo cover |
| 2 x | 50x45 mm micro-mini servo cover |
| 2 x | Bidule 170 ARF 3.48 m |
| 2 x | Bidule 111 3000 mm |
| 2 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
| 2 x | 90x75 mm standart servo cover |
| 2 x | Avia (Top Model) |
| 2 x | Adjustable launching hook |
| 1 x | 7 mm gas motor standoff |
| 2 x | 90x60 mm standart servo cover |
| 2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | Cockpit metalic closing |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 2 x | Clip fixing for wing (2 pcs) |
| 2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 3 x | 11 mm wing servo holder |
| 2 x | MPX Support |
| 1 x | Towing hook |
| 1 x | Towing hook <3m |
| 2 x | L ELBOW 90º ø 25 mm |
| 1 x | Spare screw M3 6pcs. |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | Oracover Brown 2 m |
| 1 x | KABRIOLIN 3D Electric 1.4m |
| 1 x | Prelude ARF 2500 mm (TopModel) |
| 1 x | EXHAUST STACK Ø 25 mm GP-61/123 |
| 2 x | EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61 |
| 2 x | MIG AC 400 /14 |
| 1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
| 1 x | 12 mm dogdrive props |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | NoNa BB wheel Ø105x35mm in pair |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Cable control set |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Ventus 2cx 4.5 m Cabling wings |
| 2 x | FANTASY ARF 3.0m, Fundas alas |
| 1 x | |
| 2 x | DINO Glider ARC |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Round Rod 3,0x1000 mm |
| 2 x | Servo TOPMODEL DS1413 T |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Horn with ball 40x30 |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 2 x | Horn for flap control (1 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | NoNa BB wheel Ø175x55mm in pair |
| 1 x | Regulador XC4018BA V2 (40Amp) |
| 2 x | Propeller POWER-PROP 7x7 |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Premium servo extension 100cm |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Grafas ARF 3.0 m (Top Model) |
| 1 x | Vasa model Catapult |
| 1 x | Red smoke canister 140 g |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Gracia (Top Model) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Swift S1 De-luxe 3.730 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Blue smoke canister 140 g |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Glases Stratus |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Oracover Red 2 m |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
| 1 x | L ELBOW 90º ø 25 mm |
| 1 x | NoNa BB wheel Ø125x35mm in pair |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Gracia Maxi ARF, spare wings (Top Model) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Parachute P4 |
| 1 x | Navaho new design (Top Model) |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | Futaba 20 mm servo arm |
| 1 x | 12 mm mast holder |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Vertical mounting servo holder |
| 1 x | Futaba 30 mm servo arm with M3 ball link |
| 1 x | Motor XPower F2915/12 XLight |
| 1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
| 1 x | Oracover Verde 2 m |
| 1 x | Xplorer3 anemometro |
| 1 x | Premium servo extension 75cm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | SSPS105 Super Hi-Power servo |
| 1 x | HITEC 17 mm servo arm with ball link HITEC |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Hitec 38 mm servo arm |
| 1 x | 54 mm Futaba servo arm tandem with ball link |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | 46 mm Futaba servo arm tandem with ball link |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 1 x | Hitec 20 mm servo arm |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | 28 mm turnbuckle |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | 12x8 tree blades propeller |
| 1 x | 10x7 tree blades propeller |
| 1 x | Horizontal mounting servo holder |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Adapter rotula M3 |
| 1 x | 15x7 tree blades propeller |
| 1 x | FUTABA 20 mm servo arm with ball link |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | "L" servo arm 65x49 mm (2 pcs) |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | Futaba 52 mm servo arm |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | Futaba 38 mm servo arm |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | Hitec 25 mm servo arm with M3 ball link |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Motor XPOWER F2919/10 F5J Light |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | NoNa BB wheel Ø150x45mm in pair |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | XPower XC3522/5 LS |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | Retract undercarriage for gliders up to 2 Kg |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | Oracover White 2 m |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | NoNa BB wheel Ø200x60mm in pair |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | NoNa BB wheel Ø130x40mm in pair |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Servo DITEX EL0510M |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Blades 330mm |
| 1 x | Premium servo extension 25cm |
| 1 x | Servo DITEX TD2612S |
| 1 x | Premium servo extension 50cm |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Xplorer2 anemometro |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Canopy Latch |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Tow hook for tug |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
 |
| 20,221.57EUR |
