| 1 x | Softshell Hispano Aviación |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Shirt Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Xplorer3 anemometro |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Hot Glue Stick RED |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 2 x | Xplorer1 anemometro |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | Xplorer4 anemometro |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 2 x | One touch canopy lock |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Suncover 100cc Red |
| 1 x | PIX Hawk with accesories |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Baseplate servo |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
 |
| 6,314.28EUR |
