| 1 x | 13 mm wing servo holder |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | 18 mm wing servo holder |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | 11 mm wing servo holder |
| 2 x | 90x60 mm standart servo cover |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | 65 mm mini servo cover |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Vacuum pump 12 CFM |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Starter EM Gear Power 80 |
| 2 x | Hot Glue Stick BLACK |
| 2 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 2 x | Ball Link Plier |
| 2 x | Copier 5x20 cm pcs |
| 1 x | Canopy Latch |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 3 x | |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Digital precision scale up to 2000 g |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Ball Link Plier |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 3 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 2 x | Starter 12v (Max 90 and 15ccm) |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Z Bender - S Type Tool |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Covered closure or fairings |
| 1 x | Cut tube |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | 3,0x60 mm allen screwdriver |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Vacuum pump P1-N |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Hot Glue Stick RED |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | One touch canopy lock |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 2 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Angle measurer |
| 1 x | Field folding model stand |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | 25 mm carbon servo arm |
| 1 x | Horns set HS-65HB/MG, 5065MG |
| 1 x | Propeller balancer |
| 2 x | Servo DL3017 Digi 17Kg-0.15s/60º |
| 1 x | MIG 29 3D RTF, Servo |
| 3 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Fast attachment for servos (25 pcs) |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | SSPS105 Super Hi-Power servo |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Parachutist |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | 90x75 mm standart servo cover |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Mini-handed clamp |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
| 3 x | Copier 2x20 cm pcs |
| 1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Dean-T Plug Mold |
| 1 x | Servos security connector (2 pcs) |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | Digital scale up to 40 kg |
| 1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
| 1 x | Servo BLS-M55B 61.2kg |
| 1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
| 1 x | OPTOTRONIX Aurora LCU |
| 2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | |
| 1 x | XT-60 connector (female) |
| 1 x | Bag connector 2 mm |
| 1 x | Protector Connector Dean-T (1 pair) |
| 1 x | Connectors MPX black male |
| 1 x | MPX PCB "4 Pins", 5 pieces |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Soldering PCBs 8pin, 5 pieces |
| 1 x | MPX housing with flange (4 pcs) |
| 1 x | Mounting frame MPX male connector |
| 1 x | MR30 connector male |
| 1 x | Mounting frame MPX female connector |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Connectors MPX black female |
| 1 x | Conector XT-30 (macho) |
| 1 x | Kontronik connector (10 connectors, 5 pairs) |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | 40 mm air cylinder |
| 1 x | CA Glue fast 20g |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | CA Glue (medium) 20g |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 1 x | Kwik link unmount tool |
| 1 x | Cierva C30 Elevator |
| 1 x | GPS Sensor + Logger OPTronics |
| 1 x | DPSI RV Mini 5 Magic |
| 1 x | Propeller diller for EME35 and DLE35 |
| 2 x | Tool for entel |
| 3 x | Pistola termica MH 550 micro |
| 1 x | Mold plugs XT-30 |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Mold plugs XT-90 |
| 2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | Heat Seal Iron |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 2 x | 10-15mm Servo Arm HITEC |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 2 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | 25 mm Sandpaper file |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | EC-Cutter |
| 1 x | Roller cutter 28 mm |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 2 x | Precision wrench L100 mm |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Head upper part |
| 1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
| 1 x | LA500 housing-upper cyclic |
| 1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
| 1 x | LA500 Autogyro |
| 1 x | Balls 4 mm |
| 1 x | Head lower part |
| 1 x | Cierva C30 spanish decoration Stickers |
| 1 x | Head lower part New |
| 1 x | Head core bushing |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Mini Infrared Thermomiter |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Snap for floding prop for 2 mm axi |
 |
| 11,133.71EUR |
