| 2 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Nitroverdu 500 ml |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Hobbylite Filler, Balsa colour |
| 3 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Spannlack 1000 ml |
| 2 x | 1/10 Pilot "Jimmy" |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | 1/6 Pilot "John" |
| 2 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 2 x | 100 mm rods set for direction control |
| 4 x | Cable grommet Ø 3.2 mm (4 uds) |
| 2 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | 45 mm rods set for direction control |
| 2 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | 28 mm tailwheel unit |
| 2 x | PROFI TX fastening rings |
| 2 x | 100 mm rods + T patellas set for direction control |
| 2 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | 1000 x 2 mm steel wires |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Canopy Latch |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Support hands Issuer PROFI TX |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 2 x | Paramotor BackPack XXS 2 |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 2 x | Flat Connector 4.0 mm x 1000 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 2 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 2 x | Strip 1,5x1,5x330 mm |
| 2 x | Arnes cruzado Confort de Luxe PROFI |
| 1 x | Steering arm 12 mm Ø 3 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 3 x | Rubber profile 6-2 mm 2M |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | 2012 Aero-naut Catalog |
| 2 x | Allen wheel collar M3x3 |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 3 x | Lead with adhesive (2 pcs) |
| 2 x | Snap pin for micro clevis (10 uds) |
| 1 x | Me-163 |
| 2 x | A/C quality beech plywood 600x300x2.5 mm |
| 1 x | Camera ECO Fly Cam One V2 |
| 2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 2 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Angle measurer |
| 1 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | 14 mm portholes (10 pcs) |
| 2 x | A/C quality beech plywood 600x300x1.2 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 4 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Snap for floding prop for 2 mm axi |
| 2 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | A/C quality beech plywood 600x300x4.0 mm |
| 3 x | Split pin 1x8 mm (10 uds) |
| 2 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 2 x | Landing gear axle Ø 6 mm (2 uds) |
| 2 x | ABS angle 4,0x4,0x1000 mm |
| 3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 2 x | SE Ring 450 mm (2 pcs) |
| 3 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.2 mm) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Rubber profile 8-2 mm 2M |
| 2 x | VBar NEO VLink + Gyro 6.1 Express |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Spray EC Red 400ml |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 2 x | 10 mm dogdrive props |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | ABS angle 2,0x2,0x1000 mm |
| 2 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Festo 6mm Tubing Holder (10 uds) |
| 1 x | Initior Receiver FRX2 Wireless |
| 2 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Parachute BACKUP X100 |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | GuardianTM 2D/3D Inertial Stabilizer |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | CC 03 |
| 1 x | Opale Rucksack |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 10 mm floating pad (72 pcs) |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | FESTO connector 1/8 Quick 6mm 90º |
| 1 x | Carbon fiber rod 0.7 mmx1000 mm |
| 1 x | Propeller balancer |
| 3 x | Clip fixing for wing (2 pcs) |
| 3 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Windsock Ozone L - 700 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Spinner 40 mm Black (Kavan) |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Spray Graphit 33 |
| 2 x | 45 mm rods + T patellas set for direction control |
| 1 x | Cockpit aluminium closing |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | BABY glider (Aero-naut) |
| 2 x | Silent-blocks DLE 170M |
| 1 x | Sparkplug NGK CM6 |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | VBar NEO VLink + Gyro 6.1 Express |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 2 x | Profile ABS triangular 2.0x1000 mm 90º |
| 3 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | NF-1 RC set |
| 4 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 2 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Landing gear strap large (4 uds) |
| 2 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Spark plug key Brisk MVVS (M14) |
| 1 x | Futaba 52 mm servo arm |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 2 x | Snap long M2 (10 uds) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Spinner 105 mm CFK |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | 290 mm M4 7/8x212 mm shaft ship |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 2 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | HITEC 20 mm servo arm with ball link |
| 2 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | Profile ABS Square 1 x 1000 mm |
| 1 x | X-RAY Micro QR (Rudder) |
| 2 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Propeller balancer |
| 1 x | 45 mm flag mast |
| 1 x | Birch plywood plate 900x300x0.4 mm |
| 2 x | White smoke canister 140 g |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
| 3 x | Eagle Tree FPV Station |
| 1 x | Balsa panel 10x100x1000 mm |
| 2 x | ABS "T" angle 2.0x2.0x1000 mm |
| 2 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | L-Connector 4.0 mm x 1000 mm |
| 2 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Cable with accesories |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 2 x | Interruptor On/Off Corto micro |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 300 AMP Electric Expander |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Smoke set "M" |
| 1 x | Boxer Electric Fuel Pump (Glow) |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Nylon gear block Ø 5 mm (2 uds) |
| 2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 3 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | NF-2 RC set |
| 2 x | XTorque CFK Servohebel 38 |
| 1 x | Glider IKARUS |
| 1 x | Engine Temperature Sensor Kit |
| 1 x | Strip 3,5x1,75x330 mm |
| 2 x | Motor DLE 170 M- Paramotors |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Air pressure gauge |
| 2 x | White smoke bombs AX-18 (5 pcs) |
| 2 x | Tip wing protector 40x14 (2 pcs) |
| 2 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod M3 |
| 2 x | Servo current Logger (SERVO-CURR-LOG) |
| 1 x | DINO Glider ARC |
| 1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 2 x | Servo arm with 4 mm hole to FEMA 9810A |
| 2 x | BALSA triangular 15x15x1000 mm |
| 2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Wheel cover holder Ø 4 mm (2 uds) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Balsa panel 3.0x100x1000 mm |
| 1 x | 20x200 mm battery rings |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 2 x | Adaptador equilibrador HITEC (XH) |
| 1 x | Winter Glove for DC |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | F1 Prop Cap Can (Fuel Container Conection) |
| 1 x | DPS Switch Ampere |
| 1 x | Angle of incidence meter |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | Cyano INSTA - CURE™ Pocket (18g) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Epoxy QUIK-CURE™ 5 min (260g) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | AXI 2212/20 V2 |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Motor OS 37 SZ-H |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 2 x | ABS "T" angle 8.0x8.0x1000 mm |
| 3 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | NF-3XL set |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Potenciometro micro |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | 5 mm M2 variable horn |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Control horn long w/ball |
| 1 x | Tape GFK 50 mm |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Clip mini fixing for wing (10 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | AXI 2808/16 V2 |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Katana Mini carbon wheel pants (2 pcs) |
| 2 x | 14 mm Portholes for screws (10 pcs) |
| 2 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Equipo de equilibrado tamaño M |
| 2 x | Trailing edge BALSA 37x8x2 mm |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
| 1 x | Rudder 36x60 mm |
| 1 x | Boat 82 mm |
| 1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
| 1 x | Servo safety connector (10 pcs) |
| 2 x | 290 mm 290 mm M5x18 mm shaft ship |
| 1 x | Spinner 60 mm Black (Kavan) |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | Brass control horn M2 short for wire (10pcs) |
| 1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
| 1 x | 3l Smoke oil |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Receiver DUPLEX R3L EX 2.4 GHz |
| 1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Cyano SUPER - GOLD™ Pocket (18g) |
| 1 x | Fail Safe air retract |
| 1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | Receiver replacement antenna, approx. 85 |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | TARANIS Q X7 |
| 2 x | A/C quality beech plywood 498x247x1.2 mm |
| 1 x | 33,0 mm propeller (left propeller) |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | Propeller POWER-PROP 16x8 |
| 1 x | Spinner 125 mm GFK |
| 1 x | ExtraCA Top |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Blade Holder (3 blades) |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 2 x | 15x7 tree blades propeller |
| 2 x | EXCITE S400 Pylon |
| 1 x | Axial ball bearing Ø 5 mm |
| 1 x | Guide capes 25 mm (2 pcs) |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | OPTIC 8 opto Rx-servo insulation |
| 1 x | 100 AMP Electric Expander |
| 1 x | Chigre de amarre Scale 1:32 |
| 1 x | Rudder 10 mm |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 3S |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
| 1 x | Motor OS 50 SX-Hyper |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Long horn 50x26 |
| 1 x | 39,0 mm propeller (left propeller) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | Carbon fiber rod 1.0 mmx1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | DUPLEX RC Droid Box - DC/DS |
| 1 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | AXI 2814/10 V2 |
| 2 x | Propeller POWER-PROP 9x6 |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Propeller shaft supports |
| 2 x | Round Rod 1,0x1000 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Pendulum glow tank |
| 2 x | Round Rod 6,0x1000 mm |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | 3-Blade Spinner 70 x 84 mm GFK |
| 1 x | Red smoke canister 100 g |
| 2 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Spinner 60 mm White (Kavan) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | 80 mm rods set for direction control |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Axle for AXI 4130/xx motors |
| 1 x | RC Power Switch 5A |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
| 1 x | VP-22SG Oscillating pump |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Propeller MENZ-S 18x8 |
| 1 x | Davit 70 mm (2 pcs) |
| 1 x | Debonder UN - CURE™ (30g) |
| 1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | 8x4.7 * 20x12 carbon propeller |
| 1 x | AXI 2217/20 V2 |
| 1 x | Brake for 140 mm wheels |
| 1 x | Motor OS FS 95 V 4T |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Doppelpoller 17 mm (6 uds) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | Propeller electric carbon 10x8 |
| 1 x | Y Cable |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | 6 mm M3 variable horn |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 2 x | Carbon Non-crimp BIAXIAL 12k 200 g/m² 127 cm x 2 m |
| 1 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
| 1 x | Propeller 3BL 50 mm M4 Plastic |
| 1 x | White smoke canister 100 g |
| 1 x | Propeller MENZ-S 18x12 |
| 1 x | Sparkplug DLE CM6 |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 1 x | AXI 5320/28 V2 |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | AXI 4120/14 V2 |
| 1 x | Cap Hispano Aviación |
| 1 x | Fournier RF-4D |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | SebART Gyro 3 AXIS gyro system |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | DUPLEX R10 receiver 2,4GHz |
| 1 x | Covered closure or fairings |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | Pushrod octagone 4/3 |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | AXI 5325/18 V2 |
| 1 x | Epoxy QUIK-CURE™ 5 min (130g) |
| 1 x | 3-Blade Spinner 70 x 70 mm GFK |
| 1 x | JIVE 80+HV Esc |
| 1 x | Motor DLE 170 cc Twin |
| 1 x | Hose clips 4 mm |
| 1 x | Servo MKS HBL599 SL |
| 1 x | DUPLEX 2.4 EX MBar |
| 1 x | Motor OS MAX 65 AX (incl. muffler) |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Spinner 60 mm GFK |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Cyano INSTA - CURE™ (12g) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | DUPLEX 2.4EX MUI 75 |
| 1 x | Horn DUBRO 1/2A |
| 1 x | MicroPower E-Logger V4 100 A |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | SERVO DES 806 Pignons |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Receiver replacement antenna, approx. 15 |
| 1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
| 1 x | Propeller POWER-PROP 15x10 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Brushless Motor RPM Sensor |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 2 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Spinner 110 mm GFK |
| 1 x | Regulador Jeti Jes 045 |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | Propeller MENZ-S 20x12 3 blades |
| 1 x | Woodruff key for DA50/85/100/150 and DA 200 |
| 1 x | DLE 111 pipe plug |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | ASK 21 6.8m |
| 2 x | Altimeter MicroSensor V4 (ALTIMETER-V4) |
| 1 x | Pitot tube JETI MSpeed DUPLEX |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Propeller MENZ-S 18x8 3-Blades |
| 1 x | 90x60 mm standart servo cover |
| 1 x | ABS 500 x 300 x 1,5 mm (white) |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | AXI2820/8 |
| 1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | Spinner 55 mm White (Kavan) |
| 1 x | Cyano INSTA - CURE+™ (56g) |
| 2 x | Davit 85 mm (2 pcs) |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Brass wire 0.30 mm (25 m) |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | EDF 60/25 Mega |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | GPS Expander Module |
| 1 x | Sparkplug 1/4-32 Glow |
| 1 x | B4-4 rocket charges |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | GPS Logger Dymond |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Birch plywood plate 900x300x0.8 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Propeller electric carbon 10.5x6 |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | Propeller MENZ-S 21x12 |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | ABS 500 x 300 x 1 mm (white) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Motor OS FS 95 AX |
| 1 x | B4-0 rocket charges (10 pcs) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 2 x | Spare Shaft Ø4mm L:450x23mm M4 |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Canister combo DLE 55 cc |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Cannon 12.7 cm (2 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø1.7 mm) |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | AXI 2808/24 V2 Long |
| 1 x | Propeller MENZ-S 15x8 3 blades |
| 1 x | SERVO DES 806 Pignons |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Wheel FEMA 140 mm / 6 mm |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | L-shaped servo mount |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Body for landing gear Ø 3 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
| 1 x | Spare Shaft Ø6mm L:450mm M5 |
| 1 x | Set ignition smoke canister |
| 1 x | AXI 2826/10 V2 Long |
| 1 x | Crystal TX 35.150 Ch 75 |
 |
| 26,981.57EUR |
