| 1 x | EC-Cutter |
| 1 x | Dean-T Plug Mold |
| 1 x | Digital scale up to 40 kg |
| 2 x | Copier 2x20 cm pcs |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Copier 5x20 cm pcs |
| 1 x | |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | 100g Flux Paste for Silver Solder |
| 2 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | 25 mm Sandpaper file |
| 2 x | Dust collector for mould cleaning |
| 2 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | 2,5x60 mm allen screwdriver |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Ball Link Plier |
| 1 x | Ball Link Plier |
| 2 x | Fresa corte diamante Ø 1.0mm (bola) |
| 2 x | Cut tube |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 2 x | 15 mm reinforced hinge |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Stickers-digit for marking |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Z Bender - S Type Tool |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Starter EM Gear Power 80 |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 2 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 2 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 3 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Hot Glue Stick RED |
| 2 x | CC 02 |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | 3 LiPo XH>EH adapter |
| 1 x | CM-3 |
| 1 x | CC 03 |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | CC 01 |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | Connector Sub-D 2+5 Female |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 2 x | 1/6 Pilot "Buddy" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 2 x | 1/10 Pilot "Jack" |
| 2 x | Pilot JAN 1/4 Saiplanes |
| 2 x | 1/12 Pilot "Fighter" |
| 3 x | 1/6 Pilot "Cindy" |
| 3 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 2 x | Pilot "Goose" (Slimline) |
| 2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 3 x | 1/4 Pilot "Mike" |
| 2 x | Pilot "Dick" Legends Series (Slimline) |
| 3 x | Pilot "Anthony" (Slimline) |
| 2 x | 1/6 Pilot "John" |
| 3 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 3 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Motor A2212/13T |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Sub-D Plug Mold |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 2 x | 55% silver electrodes (2 pcs) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Dremel 3000 130W |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Angle support XT60 conector |
| 1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
| 1 x | 110x55 mm SLH KOVO wheel |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 3 x | 1/10 Pilot "Jimmy" |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
| 1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
| 1 x | Bandera Frankr 4x6 |
| 1 x | MG cannon 1.8 cm (5 pcs) |
| 1 x | Fishing boat Jule Fischkutter |
| 1 x | Remolcador "Jonny Hafenschlepper" |
| 1 x | Ancla 16 mm (2 pcs) |
| 1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
| 1 x | La Capitania di Venetia accesories |
| 1 x | Glow starter with charger 230v |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 2 x | Sealing Iron Sleeve PROF |
| 1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | Vacuum pump P1-N |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Heat Seal Iron |
| 1 x | Mold plugs XT-30 |
| 1 x | Tool for entel |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Mini-handed clamp |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Propeller diller 5/6,3/8/9 |
| 1 x | Sealing Iron STANDARD |
| 1 x | Pistola termica MH 550 micro |
| 1 x | Mini Lock Grips 2PCS |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | MAX BEC |
| 1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
| 1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | FA27.2×8.9 Prop-2PCS/PAIR |
| 1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
| 1 x | Connector CAN 15 |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | SBEC 40 |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Precision wrench L100 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Piloto jet 130 mm |
| 2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 2 x | 1/6 Pilot "Tony" |
| 1 x | TrainerCord (master-learner) |
| 1 x | USB interface ALTIS |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | MAX BEC 2D plus EX |
| 1 x | EWC6 40 cm wing connector |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | Interruptor RX/Batterie |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Heli blades angle measurer |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Rubber Insert soft, 1 Pcs. |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 2 x | Piloto JET 1:3,5 |
| 1 x | Sandpaper file 13 mm |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | SPS 70V 140/280 A |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | DPS Switch JR/JR |
| 2 x | PSC 5 |
| 1 x | Adapter rotula M3 |
| 1 x | Gates hinge |
| 1 x | Hitec 25 mm servo arm with M3 ball link |
| 1 x | Flat washer 2.2 mm (20 pcs) |
 |
| 9,150.95EUR |
