2 x | Angle measurer |
2 x | Indoor hinge with servo arm integraded |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Angle of incidence meter |
3 x | Gates hinge |
3 x | Propeller balancer |
3 x | Small flex hinge (12 uds) |
2 x | Surface Indicator Gauge Small |
3 x | Truck-trailer for gliders 720 x 239 mm |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
4 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Oracover Black 2 m |
2 x | Oracover Yellow CUB 2 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | 6 mm aluminium horn with patella |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | 25 mm reinforced hinge |
2 x | Para-RC Mix |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Motor OS FS 95 V 4T |
1 x | RH long aluminium horn (2pcs) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Short ball link M1.6 (6 uds) |
3 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Ball link M3 (6 uds) |
1 x | Cable control set |
1 x | Parachute P4 |
1 x | Trike XL motor set (motor+esc+prop) |
4 x | Joint with bearing M3 22x5,5 |
1 x | Paramotor Trike XL |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Rescue 1,8m2 / BackPack |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
3 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Short ball link M3 (6 uds) |
3 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Ball link M3 RPA's-UAV's |
4 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
2 x | Spinner NUT M8x1,25 |
3 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
5 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
4 x | Spinner NUT M5 |
3 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
4 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
5 x | Sanyo TX Battery Eneloop 7,2 V MPX |
2 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
5 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
4 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
2 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spinner NUT M4 |
4 x | Spinner NUT M6 |
2 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
4 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
2 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | 15 mm reinforced hinge |
1 x | Extra long horn 60x30 |
2 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
3 x | Spinner NUT 1/4x28 |
4 x | Spinner NUT M5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
2 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
3 x | Spinner NUT M6 |
3 x | Glases Flitemaster |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Medidor ángulos y/o incidencias |
3 x | 5 mm M2 variable horn |
2 x | ABS tube 12.0x10.0x1000 mm |
2 x | Adapter 3,2 mm M6 |
2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Long ball link M3 (6 uds) |
1 x | Silencer for ZG22, ZG23, ZG231SLH, G2D96-D |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
2 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
4 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
1 x | 5 mm M2 variable inclined horn |
2 x | 63 mm INO spinner (carbon imitation) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Cono NUT 5/16"x 24 -M4 |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Servo FUTABA BLS172 SV |
1 x | Adjustable brass horn threaded M3 |
3 x | Micro flex hinge (12 uds) |
2 x | Vest clothes Hispano Aviación |
1 x | Muffler for Titan ZG 26SC/EI |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Universal batery Tester |
1 x | Motor OS FS 95 AX |
2 x | Nut for 515/518/519 spinner special for Hacker |
1 x | 10 mm gas motor standoff |
2 x | Muffler DLE-120 Right |
1 x | Horns indoor |
2 x | 1/6 Pilot "John" |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Piston ring for DA-150 |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | |
1 x | Gasket carb - intake manifold for ZG 74B/ZG 80G |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
2 x | Short adjustable control horn 3x24 |
4 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
2 x | Brass control horn M2 long for wire (10pcs) |
2 x | Cylynder DLE 20-RA |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
1 x | Shaft for A60-L (140mm) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Spinner INOVA 102 mm Black |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | Exhaust gasket DA-150 |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
4 x | Z-shaped servo mount |
2 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | Flybar support metal LAMA |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Piston ring for DLE-30 |
1 x | Ignition module ZG 38/S/SC |
2 x | Actro 32-3 Heli MAX 5mm |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | 18m Fitting barb |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
3 x | Flap hinge (6 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Motor A30-10 XL V4 |
2 x | Ball link M1.6 (6 uds) |
1 x | Canister combo DLE 55 cc |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
3 x | ABS tube 4.0x3.0x1000 mm |
1 x | 1000 cc gasoline fuel tank complet |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | T-shape holder metal LAMA |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Motor OS 81 FS 4T |
1 x | Spring clamp for tube Ø50 mm |
1 x | Long pinned hinge (12 uds) |
1 x | ABS tube 8.0x7.0x1000 mm |
3 x | Axi for MVVS 3.5 Sport |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Servo FUTABA S 9670 SV |
1 x | Cierva C30 Body Spain |
1 x | Joint with bearing M2 22x5,5 |
1 x | Stick coupler Ms 15 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Screws M1,6x6 Allen |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | Captador OS GT 33 cc |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Capstan of plastic 91x44x45 mm |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Life guard Ø 35,0 mm (2 pcs) |
1 x | Muffler DLE 20 |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Ball link M2,5 (10 pcs) |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Piston ring for DLE-20 RA |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Small aluminium horn gold (2pcs) |
1 x | Carburator Moki S400 |
1 x | Head spacer |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | 102 mm INO spinner (carbon imitation) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | F3A carbon 95 mm spinner |
2 x | M3 Maxi ball link (2 uds) |
2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Straightened threaded rod M2-1m |
1 x | Vess propeller 13x6 S |
1 x | 6 mm blue aluminium threaded horn with patella |
3 x | Para-RC Trike "RC-Bullix" |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Sheave Pl. 2R. 12 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Winter-Glove DS tx |
1 x | Oracover Verde 2 m |
2 x | Hobbylite Filler, Balsa colour |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Servo holder for retract |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Double side nipple |
1 x | Xplorer1 anemometro |
1 x | Balls 4 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ZG231cc SHL |
1 x | Life guard Ø 8 mm (24 pcs) |
2 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Propeller 3BL 50 mm M4 Plastic |
3 x | Socket head ball link M3 (2 uds) |
1 x | SCHARNHORST accessories |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Ignition for ZG motors |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
2 x | Ball link M3 (10 pcs, flat ball) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Hub DLE 30 |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Muffler ZG 38/S/SC |
1 x | AXI 2808/20 V2 Long |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
2 x | 1/6 Pilot "Buddy" |
3 x | Pin hinge 26x11 mm (10 uds) |
1 x | AXI 2217/20 V2 |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | AXI 2814/10 V2 |
1 x | Horn with ball 40x30 |
1 x | Coupling for 5 mm axis |
1 x | Logo 400 SE VBar |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Head lower part |
1 x | 28 mm turnbuckle |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | La Capitania di Venetia 1:50 |
2 x | Conector FUTABA Servo male (10 pcs) |
2 x | Vacuum pump P1-N |
1 x | Kerostarter K30G |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Stickers-digit for marking |
1 x | Prelude ARF 2500 mm (TopModel) |
1 x | Motor A2212/13T |
1 x | Avanti S 1.8m Jet RED Style |
1 x | Tube bender |
2 x | Gear for D 200 BX |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | Housing Ø 11 mm (20 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
2 x | Electric spoiler 300 mm (2 pcs) |
1 x | 12x6 tree blades propeller |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Ply-Span 450x600/13g Red |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Small Crow DLE-170M |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Blade holder metal LAMA |
1 x | 38 mm Alu spinner 5 mm pleg. propeller |
1 x | Stainless Steel Bend D 20x0,6mm |
2 x | Blind nut M3 (4 pcs) |
1 x | Set Altimeter SHRead |
1 x | Railing 5x100 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Carburettor Intake Bend for ZG38 |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | 1/6 Pilot "Garry" |
1 x | AXI 2808/20 V2 |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | M3 black washers (4 pcs) |
1 x | Mounting base Ms 12 mm |
1 x | Xplorer4 anemometro |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
3 x | ABS tube 18.0x16.0x1000 mm |
1 x | Spring Clip Ø25 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Motor A200-8 |
1 x | Shaft sleeve LAMA |
1 x | Silencer ZG62, new version |
1 x | White aluminium 230 mm landing gear |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | LUCAS pilot ARTF |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Reed valve petal for DLE 111 |
1 x | Header ZG 45/62, "wide" |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Motor OS 55 AX |
2 x | Silencer with rear exhaust DA-120 |
1 x | 12 mm mast holder |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | Motor A30-12 XL Glider |
1 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Mig-15 "UTI" (RBC Kits) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | SAVOX SH 1290 MG servo digi |
1 x | DLE 111 pipe plug |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Spark plug cap DLE 55 / CM6 |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
2 x | Small pinned hinge (12 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Rivette Ø 1,5 mm (50 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Motor OS MAX 120 AX |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Spinner 90 mm GFK |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
2 x | Futaba male 40 cm extension |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | 3 mm Prop Adapter M6 |
1 x | Long ball link M2 (6 uds) |
1 x | Extension for SensorSwitch 30cm |
2 x | Quicklock washer 1 mm (10 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | Mounting base Ms 8 mm |
1 x | LA500 pre-rotation gear hub |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | Motor OS MAX 160 AX |
1 x | Horn for flap control (1 pcs) |
1 x | Cylinder ZG 26SC/SLH |
1 x | Horn 6/20 with M3 Bearing |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | KS86 V muffler up to 65cc |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Nut M2 securing |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | 1/4 Pilot "Mike" |
1 x | Metalic joint for DA-85/DA170 cilinder/elbow |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | Steel cylinder screw DA50/60/100/120 |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Coupling for 3 mm axis |
2 x | Servo SAVOX SA-1258 TG |
1 x | 22m Fitting barb |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | STEUERRAD met. 25 mm |
2 x | Horn DUBRO 1/2A |
1 x | 30E class, Spare wing joinner (SebART) |
1 x | Spinner 100 mm CFK |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
2 x | Servo SAVOX SA-128S SG |
1 x | AXI 2217/16 V2 |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | 33,0 mm propeller (left propeller) |
1 x | Transom 59x46 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Pile railing 2D/30 mm (10 pcs) |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Conector JR Servo female (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | KATANA DV 20 1470 mm |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | OS 37 SZ-H, Piston |
1 x | Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23 |
1 x | Charger 220/110v |
1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Canister combo DLE 120 cc |
1 x | Swashplate metal LAMA |
1 x | Spinner 110 mm GFK |
1 x | Furling sail Ms.10mm (5pcs) |
1 x | AXI 2820/8 V2 |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | ODYSSEY Yellow, Canopy |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Ply-Span 450x600/13g White |
1 x | MPX Sub-D Adaptor |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Small pinned hinge (6 uds) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Servo HITEC HS-45 HB |
1 x | ORACOVER Fluor red (2 m) |
1 x | Smoke set "M" |
1 x | Ply-Span 450x600/13g Orange |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Oracover Orange 2 m |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Fascination 3600 mm (Top Model) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | VBar NEO |
2 x | Servo HITEC HS-53 |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Green smoke canister 65 g |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Ring 320 mm length (5 pcs) |
1 x | Tape GFK 25 mm |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | 2,5x60 mm allen screwdriver |
1 x | Oracover Azul 2 m |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 1/12 Pilot "Tom" |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | 40 mm air cylinder |
1 x | Ion Pro, Elevator (JP Model) |
1 x | PS-050 TONEGAWA Servo |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Ventus 1:4 set of instruments |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Pilot "Goose" (Slimline) |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | 6 mm M3 variable inclined horn |
1 x | Red smoke canister 140 g |
1 x | Servo Tester |
1 x | Control horn long w/ball |
2 x | Ferrita 27x14x7 mm |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Connectors banna oro 3 mm (M/F) |
2 x | Servo Digital HITEC HS-5065 MG |
2 x | MIG 29 3D RTF, Servo |
2 x | Propeller set 400 (2R+2L) |
1 x | CC 02 |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | 30 cm BEC cable (male) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Air pressure gauge |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | L-shaped servo mount |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | DYNAMOMETER S-1580 |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Hitec 30 mm servo rounded arm |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo HITEC HS-225 MG |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Landing gear Rocket 400 |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Optical RPM Sensor |
1 x | 5 line servos wire black (1 m) |
1 x | FunCup XL RR |
1 x | 2,0x50 mm allen screwdriver |
1 x | Servo HITEC HS-56 BB |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Partall paste 650 g |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | TrainerCord (master-learner) |
1 x | Fixed launching hook |
1 x | Cockpit aluminium closing |
1 x | Mini neumatic retract landing gear |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | Gear set HITEC HS-65 HB |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Oracover Red 2 m |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Straightened threaded rod M3 - 1m |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Field folding model stand SebArt |
1 x | Marker ties (20 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Servo HITEC HS-70 MG |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Green smoke canister 140 g |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Xplorer3 anemometro |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | CC 05 |
1 x | EASYGLIDER 4 RR |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Electric rocket starters (6 pcs) |
2 x | Ferrita 14x8x5.5 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | X-RAY Micro QR (Elevator) |
1 x | Aero-Master (Aero-naut) |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | PRO-HV Dual Action Valve |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Tape GFK 50 mm |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Hot Glue Stick GREEN |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | SAVOX SH 0254 servo |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | 18 mm reinforced hinge |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Spannlack 1000 ml |
1 x | LUNAK 4,00 m |
1 x | Ventus 2cx 4.5 m |
1 x | 30 cm DEANS female connector |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Fournier RF-4D |
1 x | Futaba Female 40 cm extension |
1 x | Red smoke canister 100 g |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Stainless steel silencer for DA 85/170 |
1 x | Extension silicon 35 cm (Futaba) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Blue smoke canister 140 g |
1 x | SERVO DES 588 BB MG |
1 x | Gear set HITEC HS-85 |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Gobe R-26S (Airwold) |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Ion Pro, Canopy (JP Model) |
1 x | Turbine KingTech K30G Restart |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Hose connector stopper 4 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Handle for PERMAGRIT lime |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Conector BEC female (10 pcs) |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Challenger ARF (Top Model) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Conector Servo female 4 pines |
1 x | 1,5x50 mm allen screwdriver |
1 x | 57 mm micro-mini servo cover |
1 x | Glases Innovation Plus |
1 x | Albatros red/white (Top Model) |
1 x | Servo HS-5765MH High Voltage |
1 x | 18 mm wing servo holder |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | "S" set for planes |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Tailwheel for 40/90 size |
1 x | Towing hook |
1 x | Gold antispark 5,5 mm plug |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Servo SAVOX SA-1256 TG |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Field folding model stand |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Oracover Azul Cielo 2 m |
1 x | Blind nut M2 (10 pcs) |
1 x | Oracover White 2 m |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Spray EC Red 400ml |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Adjustable launching hook |
1 x | Ferrita con funda |
1 x | Crimping tool |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Ball link M2 (10 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Tail wheel for 8-12 kg models |
1 x | AXI 2204 Multicopter |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Sukhoi 29S 140" 3D Monster, White cockpit(SebART) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Servo SAVOX SV-1260 MG |
1 x | Rudder tandem for two Futaba servos |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | ESC ALPHA 60A HV |
1 x | Cockpit metalic closing |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Softshell Hispano Aviación |
1 x | Cable with accesories |
1 x | Oratex Natural White 2m |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Windsock Ozone L -1200 mm |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | 1/12 Pilot "Langley" |
1 x | 1/7 Pilot "Japanese" |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Smoke set "S" |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Gear for D 54 |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Blind nut M5 (4 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | DPS Switch JR/JR |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Z Bender - S Type Tool |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Medium pin type hinge (12 uds) |
1 x | EXCITE S400 Pylon |
1 x | Oratex White 2m |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | USB Mini Camera endoscope |
1 x | 100g Flux Paste for Silver Solder |
1 x | Screws set for Hitec MG arms servo |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Servo HITEC HS-5084 MG |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | ASK 21 6.5m + pylona |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | NIKE-2 EVO ARF |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
|
58,196.13EUR |