| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Gates hinge |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | LUCAS pilot ARTF |
| 1 x | Aramid 50 daN 50 m |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 2 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Parachute P4 |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | MAX pilot ARTF |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 2 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Ballast 700gr OPALE |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 2 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Canopy Latch |
| 1 x | Vacuum pump P1-N |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Digital scale up to 40 kg |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Screwdriver for Torx® TX8 |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | Ball Link Plier |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Dust collector for mould cleaning |
| 1 x | Cut tube |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | Ball Link Plier |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Vacuum pump 12 CFM |
| 1 x | |
| 2 x | Wheel collar 2 mm Ø (4 uds) |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Trailing leg 131 mm |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Robart Door Hinge (Pk2) |
| 2 x | Gates hinge aluminium (1 pcs) |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | Set montaje amortiguador para modelos 8-16 Kg |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | Cable Cargador FUTABA |
| 1 x | Red silicone 1,0 qmm wire (50 m) |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Silicone black 0,75 qmm cable ( 1 m) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Silicon black 2,5 qmm cable ( 25 m) |
| 2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 1 x | Silicone black 1,0 qmm wire ( 1 m) |
| 1 x | Silicone black 4,0 qmm wire (25 m) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Yellow silicone 0,5 qmm wire (50 m) |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | Silicone red 1,0 qmm wire ( 1 m) |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Silicone red 6,0 qmm wire ( 1 m) |
| 1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | Silicone red 1,0 qmm wire (100 m) |
| 1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
| 1 x | SERVO DES 806 Pignons |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
| 1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | SERVO DES 707 BB MG |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
| 1 x | Servo GO-09 9g |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | USB programador GO servos |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | TWIST planeador gomas |
| 1 x | PIT (Aero-Naut) |
| 1 x | Porta Kwik link M3 3 mm (2 pcs) |
| 1 x | Micro clevis (10 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | KIRA 500-30 6,7:1 |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | KIRA 480-34 5,2:1 |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 2 x | Allen wheel collar M3x5 |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Mini-handed clamp |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Mudguard for 140/165 mm wheels |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 1 x | NF-3 RC set |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Micro Crystal RX 35.120 Ch 72 |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Tail wheel for 5-8 kg models |
| 1 x | Suncover 100cc Red |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
 |
| 9,773.26EUR |
