1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | TWIST planeador gomas |
2 x | Transmitter Crystal 35 Mc/s Ch 62 |
4 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Crystal TX 35.180 Ch 78 |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | SERVO DES 588 BB MG |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Servo Controller Fibra optica |
1 x | Servo NARO Max Std |
1 x | PPS-4D Propeller |
1 x | 500 ccm gasoline fuel tank |
1 x | Fuel Fittings-Red |
2 x | 1000 ccm gasoline fuel tank |
1 x | Quick hose connector 4-4 mm |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | T-Hose connector 3-3-3 mm |
1 x | 3 blades set |
1 x | Head lower part New |
1 x | Blade Holder Full (4 blades) |
1 x | Head runner |
1 x | Head upper part |
1 x | Cierva C30 simulated motor |
1 x | Servo Fork |
1 x | Complet landing gear |
1 x | Tail tube RAINBOW |
1 x | Wheel keeper washer |
1 x | Baering 3x8x4 |
1 x | Cierva C30 Body Spain |
2 x | Nut M2 |
1 x | Nut M2 securing |
1 x | Z Bender - S Type Tool |
1 x | Optical RPM Sensor |
2 x | Couple M4 for wire (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Charger 220/110v |
1 x | 2,3 mm Prop Adapter M5 |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
2 x | Crystal Universal RX 35.150 Ch 75 |
3 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Swing 1000 |
1 x | Crystal Universal RX 35.140 Ch 74 |
2 x | Blue smoke canister 100 g |
3 x | White smoke canister 140 g |
3 x | Smoke set "M" |
1 x | 18 mm reinforced hinge |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Miniature brass strap hinge, 1 m |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Starter EM Gear Power 80 |
2 x | Ball Link Plier |
2 x | |
2 x | Screwdriver for Hexagon 1,5mm |
2 x | Starter Sullivan-STAR 601 |
1 x | Screwdriver for Torx® TX8 |
2 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
2 x | Threaded coupler M2 (10 uds) |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Threaded coupler M3 (10 uds) |
2 x | Adapter 3,0 mm M6 |
1 x | 2 mm Prop Adapter M5 |
1 x | 12V Car Adapter |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | Locking cable tie 3.2x142 (uds) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 4,0 mm M8 |
4 x | Adapter 4,0 mm M6 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | Adapter 3,2 mm M8 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
3 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Adapter 5,0 mm M8 |
2 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
3 x | Black smoke bombs AX-60 (5 pcs) |
2 x | TMM 1210-3S heli |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Crystal TX 35.150 Ch 75 |
2 x | Red smoke canister 65 g |
1 x | Blue smoke canister 140 g |
3 x | Remote electric ignition system |
1 x | Crystal Universal RX 35.090 Ch 69 |
3 x | Green smoke canister 140 g |
2 x | Crystal TX 35.050 Ch 65 |
1 x | TMM 2512-3S heli |
3 x | White smoke bombs AX-3 (10 pcs) |
1 x | Crystal TX 35.100 Ch 70 |
2 x | Green smoke canister 65 g |
2 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | White smoke canister 65 g |
1 x | Smoke set "S" |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Red smoke bombs AX-60 (5 pcs) |
2 x | White smoke bombs AX-9 (10 pcs) |
3 x | "S" set for boats |
1 x | PCARD Wireless System |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Medium pin type hinge (12 uds) |
2 x | Indoor hinge with servo arm integraded |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Flap hinge (6 pcs) |
2 x | Tow hook for tug |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | 15 mm reinforced hinge |
2 x | SERVO HOLDER |
3 x | Fixed launching hook |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
3 x | LOWER TOW HOOK |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | KIRA 480-34 5,2:1 |
1 x | KIRA 600-30 6,7:1 |
1 x | PYRO 800-48 Long Axi |
1 x | PYRO 900-52L |
1 x | KIRA 600-20 |
1 x | PYRO 700-45 |
1 x | KIRA 480-38 5,2:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 600-24 6,7:1 |
1 x | Motor OS 3805-1200 electric |
1 x | Deposito SECRAFT V2 1000 ml Gas |
1 x | Motor Mega AC 16/30/01 |
1 x | Motor Mega AC 16/07/04 |
2 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Check valve V2 |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | 24x14 prop Super Silence |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 22x10 prop Super Silence |
1 x | Bob airtrap set |
1 x | Fuel line plugs (Blue) |
1 x | Gas combustible tube |
1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor Mega AC 16/07/08 |
1 x | Motor Mega AC 22/30/02 |
1 x | Motor Mega AC 22/30/03 |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Tygon DUBRO Medium 15m |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | Bearing 3x6x2,5 |
1 x | Raer wall |
1 x | Head core |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | Digital precision scale up to 2000 g |
1 x | Screwdriver for Torx® TX6 |
1 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Parachute expulsion foam |
2 x | "M" set |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | Tachometer HANGAR 9 digital |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Tachometer Hyperion Multi-pala |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Battery bed V2_M (black) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Initior Receiver FRX2 Wireless |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | |
1 x | "S" set for planes |
2 x | 6 mm Prop Adapter M8 |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Digital scale up to 40 kg |
1 x | 2,5x60 mm allen screwdriver |
1 x | Starter EM Gear Power 250 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Ball Link Plier |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Copier 5x20 cm pcs |
2 x | Ventral support for AX-18/AX-60 |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | 25 mm Sandpaper file |
1 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | 10 mm dogdrive props |
1 x | Control horn long w/ball |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | B4-0 rocket charges (6 pcs) |
1 x | 3l Smoke oil |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | 25 mm reinforced hinge |
1 x | Gates hinge |
1 x | 2,0x50 mm allen screwdriver |
1 x | |
1 x | Dust collector for mould cleaning |
1 x | Hot Glue Stick BLACK |
1 x | Crimping tool |
1 x | Copier 2x20 cm pcs |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Vacuum pump P1-N |
1 x | Crimping tool |
1 x | Hot Glue Stick GREEN |
1 x | Z Bender - S Type Tool |
1 x | 1,5x50 mm allen screwdriver |
1 x | Vacuum pump 12 CFM |
1 x | Hot Glue Stick RED |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Parachutist |
1 x | White smoke canister 100 g |
1 x | Red smoke canister 100 g |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | Towing hook |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | |
1 x | EC-Cutter |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Welder 100W/200V |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
2 x | 5 mm Prop Adapter M8 |
1 x | Spinner NUT M6 |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Motor holder for AC 28/7 |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Battery bed V2_S (black) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Nylon Screw M6x40 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner NUT 1/4x28 |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | LiPo Storage Box Type "BIG" |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | 12 mm dogdrive props |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Micro control horn T2 Ø 1 |
1 x | Small control horn with bearing (2 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner NUT M10x1 |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Adapter 3,2 mm M6 |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Aluminium battery holder red |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | 4 mm Prop Adapter M6 |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Smoke set "Glider" |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | |
1 x | Allen wheel collar M3x3 |
1 x | Gearbox for VM motors (3:1) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Round flex hinge (12 uds) |
2 x | Small pinned hinge (12 uds) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
|
15,936.92EUR |