| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Towing hook |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Propeller APC 12x6 Electric Pusher |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Propeller APC 13x6.5 Electric Pusher |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Propeller APC 13x4 Electric Pusher |
| 1 x | Propeller APC 10x3,8 SF Electric Pusher |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | PIX Hawk with accesories |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 2 x | 15x7 tree blades propeller |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Helice FOXY 22x10 2-Bl |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | Propeller MASTER 7x4 |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | FIALA Propeller 19x12 Electric |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | Propeller FOXY 34x12 2-Bl |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | Propeller MASTER 5,5x4 |
| 1 x | 80 mm rods set for direction control |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Bungee HLG Premium |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Propeller APC 10x6 Electric |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Stickers-digit for marking |
| 1 x | PPM Encoder Module |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Horn with ball 40x30 |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Optical RPM Sensor |
| 1 x | Tape GFK 38 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | DPSI Ampere battery backer |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Support FUEL DOT V3 |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | Aluminium M2x12 mm screw (4 pcs) |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | Propeller APC 12x4.5 MR Electric Pusher |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | 11x7 tree blades propeller |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Propeller MASTER 6x4 |
| 1 x | Propeller MENZ-S 20x10 3 blades |
| 1 x | Propeller APC 10x4.7 SF |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | CC 05 |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Propeller APC 10x4.7 SF Pusher |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
| 1 x | Propeller MENZ-S 15x8 |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | bavarianDEMON USB cable |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 100 mm rods set for direction control |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Interface Realflight Simulator |
| 1 x | Canopy Latch |
| 1 x | 30/11-26 Zoll, 3-Blade Scale |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Vasa model Catapult |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 140 mm rods set for direction control |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Adjustable launching hook |
| 1 x | SERVO HOLDER |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Allen wheel collar M3x5 |
| 1 x | CORTEX |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Propeller APC 12x3.8 SF |
| 1 x | Propeller APC 10x10 Electric |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Propeller APC 12x6 SF |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Propeller APC 11x3.8 SF |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Propeller APC 11x5.5 Electric |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor |
| 1 x | Propeller APC 12x6 Electric |
| 1 x | Propeller APC 10x7 Electric |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Propeller APC 11x7 Electric |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Propeller APC 10x5 Electric Pusher |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Propeller APC 13x6.5 Electric |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Propeller APC 11x4.7 SF |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Complete kit CAT 966G II WEDICO-construction-models |
| 1 x | Glases Stratus |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Connector CAN 15 |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | Ring 320 mm length (5 pcs) |
 |
| 10,174.58EUR |
