4 x | Tube Pitot to PIXHAWK |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Z Bender - S Type Tool |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminium servo arm (2 uds) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Ball Link Plier |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
3 x | Hot Glue Stick RED |
1 x | Oils Pumps Empty (1 liter) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | AC-10 pre-rotacion with motor |
1 x | Baseplate servo |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Xplorer2 anemometro |
3 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
3 x | Ball link Aluminio M3 (2 pcs) |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
3 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler M2 (10 uds) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Red smoke canister 100 g |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Hot Glue Stick GREEN |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | DLE Ignition unit |
1 x | 1/10 Pilot "Jimmy" |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Xplorer1 anemometro |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | 1/6 Pilot "Cindy" |
1 x | 18m Fitting barb |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | 1000 cc gasoline fuel tank complet |
1 x | MR30 connector male |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | RCEXL Electronic ignition twin A-02 |
2 x | 28x5 mm wires output (2 pcs) |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | 110x55 mm SLH KOVO wheel |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Vacuum pump P1-N |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Canopy Latch |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | X-RAY Micro QR |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 1/12 Pilot "Cougar" |
1 x | 1/12 Pilot "Langley" |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | 102 mm INO spinner (carbon imitation) |
2 x | Opto Gas Engine Kill Switch |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
2 x | |
1 x | 1/6 Pilot "Buddy" |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | Two-function control switch + button by FUTABA |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Tube bender |
1 x | 1/6 Pilot "Garry" |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Aluminium ignition bad (blue) |
1 x | 1/4 Pilot "Mike" |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | Starter EM Gear Power 250 |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | TYGON tubo 15 m Diam. 3.4 x 2.0 mm |
1 x | 102 mm aluminium spinner |
1 x | Cockpit aluminium closing 5.4g |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Fod Guard 83x32 mm |
1 x | Extension Arm for Carburetor |
1 x | Sensor Ignition RCEXL Universal |
1 x | EME 55 cc carburetor WALBRO |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Male connector for 12 pines AWG |
1 x | Male connector for 6 pines AWG |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Cable video GoPro and 5V cable |
1 x | Blind nut M6 (4 pcs) |
2 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | wire tensioner (silver) |
1 x | Wire easy tensioner (red) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | wire tensioner (blue) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | FOX 3000 mm ARF (FMS) |
1 x | SAGITA Alsema 3.0 m |
1 x | JU87B STUKA 60cc ARF - BlackHorse |
1 x | Device Terminal |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Indoor Brushed motor kit |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | PPM Encoder Module |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Carburator Moki S400 |
1 x | Allen wheel collar M4x4 |
1 x | Kit hydraulic brake |
1 x | PC-21 PILATUS Electric retract system |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | DYNAMOMETER S-1580 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Fuel Station 30L |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Telemetry interface ALTIS 12 cm |
1 x | X-RAY Micro QR (Rudder) |
1 x | Chili F3K 2 wing servo mounted |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Mudguard for 140/165 mm wheels |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Lead with adhesive (2 pcs) |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | GLOW 5C + accesories |
1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | Balsa panel 10x100x1000 mm |
1 x | Compact on-board starting system (9525) |
1 x | Servos security connector (2 pcs) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | EDF Jet-Flex 80 - 8 Kg |
1 x | KS86 V muffler up to 65cc |
1 x | Fuel tank 500ml (17oz) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | "Taxi Tank" Fuel Tank |
1 x | E-FUN BUG (ROI-Import) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Tank gas KUZA 260 cc |
1 x | PropCover 16-20" (2 pcs) |
1 x | Crystal Universal RX 35.070 Ch 67 |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
2 x | Kwik link with arm M3xM2xL24 |
2 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Metal clevis M2 (10 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Small kwik link (10 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Pulley brass 14/2 (2 pcs) |
|
15,097.92EUR |