| 2 x | 1000 ml sealer (DOPE) |
| 2 x | Release wax 250ml |
| 5 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | Spannlack 1000 ml |
| 2 x | Partall paste 650 g |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 2 x | PIX Hawk with accesories |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | Spray EC Red 400ml |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 2 x | Bungee HLG Premium |
| 1 x | Vasa model Catapult |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Motor A2212/13T |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Cinta Goldfix 1m |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | DUPLEX 2.4EX MU 3 Sensor |
| 1 x | DUPLEX 2.4EX Expander E4 |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
| 1 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | |
| 1 x | Receiver RSF08SB comatible FUTABA |
| 1 x | Receptor FUTABA R7003SB FASST |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Antenna holder bracket double |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | DUPLEX 2.4 EX MBar |
| 1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
| 1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
| 1 x | TX-Tray V1 (L) (Red) |
| 1 x | SWTU2 switch |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | PPM Encoder Module |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
| 1 x | JETI handheld transmitter DS-14 II Green Multimode |
| 1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
| 1 x | Switch for DS: Short 2 Position |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
| 1 x | Emisora JETI Duplex DS-16 II SILVER Multimode |
| 1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
| 1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Winter-Glove DS tx |
| 1 x | 35 mm gas motor standoff |
| 1 x | Switch Button DS Tx DUPLEX |
| 1 x | 5 mm gas motor standoff |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
| 1 x | ESC MEZON 115 Opto |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Decorative caps, multicoloured, short |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Xplorer1 anemometro |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Regulador Jeti Jes 045 |
| 1 x | Esc X-30-Pro BEC |
| 1 x | Charger LiPo Charger4 |
| 1 x | Regulador XC4018BA V2 (40Amp) |
| 1 x | Esc X-55-SB-Pro |
| 1 x | Esc MasterBasic 40SB |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | Actrocon 30A ESC |
| 1 x | Crystal RX 35.250 Ch 285 |
| 1 x | Esc MasterSPIN 100 Pro |
| 1 x | Master MEZON 120 |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | SKY RC Temperature Sensor |
| 1 x | ESC YGE 120 LVK |
| 1 x | Micro Crystal RX 35.160 Ch 76 |
| 1 x | Foreman, scale 1:32 |
| 1 x | Micro Crystal RX 35.080 Ch 68 |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Crystal Universal RX 35.130 Ch 73 |
| 1 x | KIRA 400-27 |
| 1 x | KIRA 600-22 6,7:1 |
| 1 x | KIRA 600-20 6,7:1 |
| 1 x | KIRA 480-38 |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | KIRA 600-20 |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | wire tensioner (red) |
| 1 x | Pull-Pull complet set with CF rudder double servo arm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | Hysol Mixing Caps SET with 10 |
| 1 x | Wire easy tensioner (red) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
 |
| 20,019.96EUR |
