| 2 x | 1/12 Pilot "Fighter" |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Tom" |
| 2 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 2 x | 1/10 Pilot "Jimmy" |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 2 x | 1/6 Pilot "Buddy" |
| 2 x | 1/7 Pilot "Japanese" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 2 x | 15 mm reinforced hinge |
| 2 x | Large flex hinge (12 uds) |
| 3 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 4 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 3 x | Gates hinge aluminium (1 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | Gates hinge |
| 2 x | Flap hinge (6 pcs) |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 2 x | Long pinned hinge (6 uds) |
| 2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | White smoke canister 65 g |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 2 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Piloto JET 1:3,5 |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | 1/6 Pilot "Cindy" |
| 2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Blades 330mm |
| 1 x | |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Crimping tool |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Vacuum pump P1-N |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Z Bender - S Type Tool |
| 1 x | Screw M2x8 (10 pcs) |
| 2 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Round flex hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
| 1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 1 x | Nylon Screw M5x30 |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Glases Ace |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | BEC 3A FOXY |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Lock nut M5 (10 pcs) |
| 2 x | 25 mm reinforced hinge |
| 1 x | Lock nut M3 (10 pcs) |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Lock nut M4 (10 pcs) |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Nylon Screw M4x20 |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
| 1 x | Battery bed V2_S (black) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Blue Aluminium lock nut M2 (4 pcs) |
| 1 x | Lock nut M2 (10 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Mould Resin P 10 kg |
| 1 x | Cotton Flocks, bag/ 500 g |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | White gelcoat 1 Kg |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Hardener P-25, canister 2.5Kg |
| 1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
| 1 x | Spinner 42 mm EXTRA 330SC |
| 1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
| 1 x | Fundas para el transporte F3A alas |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 05 |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
 |
| 6,486.14EUR |
