| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Ball Link Plier |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Ball Link Plier |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 2 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Crimping tool |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | USB HLS prog. interface |
| 2 x | Circlick securite |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | CM-3 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CC 03 |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Oracover Verde 2 m |
| 1 x | Oracover Red 2 m |
| 1 x | Oracover CHROME 2m |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Oratex Silver 2m |
| 1 x | Oratex Natural White 20m |
| 1 x | Oracover Orange 2 m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 2 x | Ply-Span 450x600/13g Yellow |
| 2 x | Oracover Yellow CADMIO 10 m |
| 1 x | Oratex Antik 2m |
| 2 x | Oracover Yellow CADMIO 2 m |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Optical RPM Sensor |
| 1 x | Oratex Natural White 2m |
| 2 x | RH long aluminium horn (2pcs) |
| 1 x | 1/4 Pilot "Heidi" |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Red smoke canister 140 g |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Ballast 700gr OPALE |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | 25 mm Sandpaper file |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 2 x | Propeller diller for EME35 and DLE35 |
| 1 x | Angle support XT60 conector |
| 1 x | Roller cutter 28 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | XT-60 Plug Mold |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 2 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | SPARK Switch 12v |
| 1 x | Micro Switch button |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Male connector for 6 pines AWG |
| 1 x | |
| 2 x | Connector Sub-D 2+5 Female |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | TrainerCord (master-learner) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female connector for 12 pines AWG |
| 1 x | FX three-position switched channel, long |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Connector CAN 15 |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | SPARK Switch 5.9v |
| 1 x | Servo NARO Max Std |
| 1 x | USB interface ALTIS |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Long horn 50x26 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | Small adjustable control horn with bearing |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Servo Tester |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
| 1 x | PVC lilac battery termo-retract 70 mm (10 m) |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Battery FUTABA 18MZ |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | Oracover White 2 m |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Oracover Azul 2 m |
| 1 x | Switch Cap L (Blue) |
| 1 x | Switch Cap L (silver) |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 2 x | Oracover Black 2 m |
| 1 x | 25 mm reinforced hinge |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Backmountset complete A40 |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | DUPLEX 2.4EX RC Switch |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Propadapter for motor A50 |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Propeller diller 5/6,3/8/9 |
| 1 x | MPX plug mold V1 |
| 1 x | Mold plugs XT-90 |
| 1 x | Universal Filter |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Pump hose (Ø 6/8 mm) transparent |
| 1 x | Switch for DS: Long 2 Position |
| 1 x | Tray JETI for DS-12 Black |
| 1 x | Digital scale up to 40 kg |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
 |
| 6,830.44EUR |
