1 x | CM-3 |
1 x | Suport PITOT |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | 30 cm BEC cable (male) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Ferrita 17x10x6.5 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Cable coupler M2 (10 uds) |
1 x | Crimping tool |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Switch Cap L (black) |
1 x | Spikes Band (5 m) |
1 x | Yellow smoke canister 140 g |
1 x | Cable control set |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | Parachute expulsion foam |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Conector XT-30 (hembra) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Indoor hinge with servo arm integraded |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Maleta transporte FUTABA 10PX |
1 x | 30 cm MULTIPLEX female connector |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | 15 mm reinforced hinge |
1 x | 12V Car Adapter |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Flap hinge (6 pcs) |
1 x | Extension 7.5 cm |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Horn with ball 40x30 |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 6 mm M3 variable horn |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | DUPLEX Satellite receiver Rsat 900 |
1 x | 5 line servos wire black (1 m) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 3,0x60 mm allen screwdriver |
1 x | 1/12 Pilot "Langley" |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Copier 5x20 cm pcs |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | BEC 3A FOXY |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Battery charging cable XT60 |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Parachutist |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Circlick securite |
1 x | Xplorer1 anemometro |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | "S" set for planes |
2 x | Conector JR Servo male (50 pcs) |
1 x | TX-Tray V1 (L) (Red) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Blue smoke canister 140 g |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | M3 Maxi ball link (2 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Red smoke canister 65 g |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Long ball link M1.6 (6 uds) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Smoke set "Glider" |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Medium pin type hinge (12 uds) |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | PCARD Wireless System |
1 x | White smoke canister 100 g |
1 x | 2 piece mounting frame |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | Digital scale up to 40 kg |
1 x | EC-Cutter |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 4 LiPo XH>EH adapter |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Angle measurer |
1 x | DUPLEX MUI 50 Sensor |
2 x | Connector CAN 15 |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Towing hook |
1 x | Propeller balancer |
1 x | CC 05 |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | CC 01 |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 5 LiPo XH>EH adapter |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | 3 LiPo XH>EH adapter |
1 x | AddCAP 10AS capacitors |
2 x | Adapter lead MPX/XT60 |
1 x | Field folding model stand SebArt |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Strip 1,5x1,5x330 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Receiver R7008SB FASSTest |
1 x | Round Rod 1,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Ferrita con funda |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | Round Rod 2,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Round Rod 4,0x1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Receptor FUTABA R7003SB FASST |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
1 x | Switch Cap M (blue) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Charger 220/110v |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Long ball link M3 (6 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | EasyFLY Addon |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Xplorer3 anemometro |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Cable coupler M3 (10 uds) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Conector JR Servo male (10 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Conector JR Servo female (10 pcs) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Conector BEC male (10 pcs) |
1 x | DUPLEX R6 receiver REX Assist |
1 x | LightBox SR |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | Adjustable brass horn threaded M3 |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 20x200 mm battery rings |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | VBar Control RX-Satellite |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Black large kwik link (10 pcs) |
1 x | Futaba male 40 cm extension |
1 x | Yellow smoke canister 100 g |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Blue smoke canister 100 g |
1 x | Futaba Radio Case |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Large flex hinge (12 uds) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Decorative caps, multicoloured |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Green smoke canister 65 g |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Battery FUTABA 18MZ |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | White smoke canister 65 g |
1 x | Conector XT-30 (macho) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Long pinned hinge (6 uds) |
1 x | Miniature brass strap hinge, 1 m |
1 x | 18 mm reinforced hinge |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Switch Cap M (silver) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Red smoke canister 100 g |
1 x | Red smoke canister 140 g |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Ball link M2,5 (10 pcs) |
1 x | Extension MPX-MPX 20 cm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Receptor MINIMA 6S HITEC |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Conector Servo female 4 pines |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | "S" set for boats |
1 x | Xplorer4 anemometro |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Tape GFK 50 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Extension for SensorSwitch 60cm |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Extension 90 cm (Futaba) |
1 x | Control horn long w/ball |
1 x | Short ball link M1.6 (6 uds) |
1 x | MicroMatch PowerBox |
1 x | Transmitter Balancer Futaba V |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Switch Cap M (red) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Oracover Azul Cielo 2 m |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | OPTIC 8 opto Rx-servo insulation |
1 x | Extension silicon 100 cm (Futaba) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | DUPLEX R7 REX receiver 2,4GHz |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Ball link M3 (10 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Horn mando long (2 pcs) |
1 x | 2 piece mounting frame |
1 x | Conector JR Servo male (10 pcs) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | "M" set |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Oracover CARBON Metalic 1 m |
1 x | Foil for sticking flaps and ailerons |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Receptor DUPLEX REX R9 Slim Assit |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Gates hinge |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Ventus 1:4 set of instruments |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Extension 30 cm (Futaba) |
1 x | Receptor DUPLEX REX R9 Slim |
1 x | M3 Maxi ball link (2 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Remote electric ignition system |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | White smoke canister 140 g |
1 x | DUPLEX R7 receiver REX Assist |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Conector JR Servo female (50 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Switch Cap L (Red) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
|
13,192.22EUR |