| 1 x | Bungee HLG Premium |
| 1 x | Towing hook <3m |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Green smoke canister 140 g |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Optical RPM Sensor |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | White smoke canister 65 g |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | 15 mm floating pad (30 pcs) |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Red smoke canister 65 g |
| 1 x | 20 g tin paste |
| 1 x | Spray Graphit 33 |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | 3 blades set |
| 1 x | Blade Holder Full (3 blades) |
| 1 x | PropCover 16-20" (1 pcs) |
| 1 x | Tail tube RAINBOW |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | LA500 front gear holder |
| 1 x | 20 mm gas motor standoff |
| 2 x | LA500 ciclic lever |
| 1 x | Motor rotor LA-500 |
| 1 x | BALSA triangular 15x15x1000 mm |
| 2 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
| 1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
| 1 x | Glases Innovation Plus |
| 1 x | Servoarm SH-81, two sides, aluminium |
| 1 x | SAVOX SH 1250 MG servo digi |
| 1 x | Servo SAVOX SV-1261 MG |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Tachometer Hyperion Multi-pala |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Gear for D 200 BX |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
| 1 x | Glases Flitemaster |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Servo SAVOX SA-128S SG |
| 1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Glases Stratus |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 1 x | Glases Aspen |
| 1 x | Glases Nimbus "Black" |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | Servo holder for retract |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
| 1 x | Z-shaped servo mount |
| 1 x | Glases Ace |
| 1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Servo SAVOX SB-2290 SG |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Servo GO-09 9g |
| 1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 1 x | Servo SAVOX SH 0257 MG |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Piñones SAVOX SH-0350 |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | SAVOX SH 1290 MG servo digi |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Glases Moritz |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | SERVO DES 568 MG |
| 1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
| 1 x | Red aluminium servo arm V3-Futaba 1,0inch |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | SERVO DES 658 BB MG |
| 1 x | Soporte metal para servos |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | SERVO DES 707 BB MG |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Servo HBS 690BB HV Digital |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Servo Mount S (red) |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Steel Screw M1x8 (10 pcs) |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | Aero-Master Cabine (Aero-naut) |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | Rotorshape Autogyro |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Fixed launching hook |
| 1 x | Blade holder upper |
| 1 x | Hose connector stopper 4 mm |
| 1 x | Filter Capacitor JR |
 |
| 6,230.31EUR |
