| 1 x | 3l Smoke oil |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Extension silicon 75 cm (Futaba) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Cabel "Y" 15 cm |
| 1 x | CC 05 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Oratex White 2m |
| 1 x | Crimping tool |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | PPM Encoder Module |
| 1 x | Red smoke canister 100 g |
| 2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Glases Stratus |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Crimping tool |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Release wax 250ml |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Smoke set "Glider" |
| 2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Ring 320 mm length (5 pcs) |
| 2 x | 100 mm rods + T patellas set for direction control |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | CC 01 |
| 2 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Smoke set "S" |
| 1 x | SERVO HOLDER |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Gates hinge aluminium (1 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | "M" set |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Marker ties (20 pcs) |
| 1 x | PCARD Wireless System |
| 2 x | Painting GHT Lexan Black 150 ml |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Adjustable launching hook |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Dremel 3000 130W |
| 1 x | Fixed launching hook |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | CC 03 |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Towing hook |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | CM-3 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | "S" set for planes |
| 1 x | Suncover 100cc Red |
| 1 x | Oracover Green10 m |
| 2 x | Threaded coupler M2 (10 uds) |
| 1 x | Parachutist |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | Flap hinge (6 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 2 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Circlick securite |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 2 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Gasket cylinder / insulator for ZG 38/S/SC |
| 1 x | Stainless Steel Silencer side outlet for ZG 20/23/26 |
| 1 x | Header ZG 45/62, "wide" |
| 1 x | Carburettor Intake Bend for ZG38 |
| 1 x | Cilinder joint for G230RC/G260RC |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | 20,5x14,5 Falcon electric V2 (40 g) |
| 1 x | 20x13 Falcon electric carbon prop (64g) |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Stickers-digit for marking |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | 140 mm rods set for direction control |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Glases Nimbus |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Glases Ace |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Glases Nimbus "Black" |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Sealing Iron STANDARD |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 2 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | Oratex Silver 2m |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Servo BMS-4112 |
| 1 x | OLED-Display for PowerBox Mercury SRS |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Kwik link unmount tool |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Towing hook <3m |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Tool for entel |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | 15 mm reinforced hinge |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Sprung retractable undercarriage (Alfa model) |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Welder 100W/200V |
| 1 x | 25 mm reinforced hinge |
| 1 x | Gates hinge |
| 1 x | Glases Aspen |
| 1 x | Retract undercarriage for gliders up to 3,5 Kg |
| 1 x | Z Bender - S Type Tool |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | Dust collector for mould cleaning |
| 1 x | LOWER TOW HOOK |
| 1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Turnbuckle M1,6x17/27 (2pcs) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Bungee HLG Premium |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | wire tensioner (black) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | wire tensioner (silver) |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | Emcotec SPS Magnetic Switch Actuator |
| 1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
| 1 x | DPSI OCP Overload protection |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
| 1 x | DPSI V-Match |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
| 1 x | MultiLog Altimeter |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Oracover Orange 2 m |
| 1 x | DPSI Micro MPS |
| 1 x | PVC red battery termo-retract 68 mm (10 m) |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
 |
| 10,623.94EUR |
