| 1 x | Cinta Goldfix 1m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | SE Ring 350 mm (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 3 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Ring 320 mm length (5 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 3 x | 20x200 mm battery rings |
| 2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 3 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 3 x | SE Ring 200 mm (2 pcs) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring 400 mm (2 pcs) |
| 2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 3 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Foil for sticking flaps and ailerons |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | EasyFLY Addon |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Catalyst INSTA - SET™ (235g) |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | 20 mm carbon horn |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 2 x | SE Ring 480 mm (2 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
| 1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Rocket D3-P |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 2.5 inch aluminium core wheel (1 pcs) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
| 1 x | Altimeter Altis NAO |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | 10 mm gas motor standoff |
| 1 x | 25 mm carbon servo arm |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Device Terminal |
| 1 x | Telemetry interface ALTIS 6 cm |
| 1 x | GPS Altis |
 |
| 6,031.12EUR |
