1 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Small aluminium horn red (2pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Horn with ball 40x30 |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Horn 5/10 with M2 Bearing |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Brass control horn M3 short for wire (2 pcs) |
4 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Horn 6/27 with M3 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | Cable with accesories |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Horn with ball 55x40 |
1 x | Small aluminium horn gold (2pcs) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oracover Azul Cielo 2 m |
1 x | Oratex Silver 2m |
1 x | Oracover Red 2 m |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Oracover Black 2 m |
1 x | Oratex Natural White 20m |
2 x | Oratex Antik 2m |
1 x | Oracover Orange 2 m |
1 x | Oratex Natural White 2m |
1 x | Oracover Black 10 m |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Distanzstück motor OS 120 AX |
1 x | Long adjustable control horn 3x34 |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Support Filtro FESTO |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Support XT60 conector (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Axle wheel with accesories |
1 x | 460 mm EPP Floats |
1 x | Blades 330mm |
2 x | Horn for flap control (1 pcs) |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | 20 mm carbon horn |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Motor A2212/13T |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | 4 mm Prop Adapter M8 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
2 x | Soporte metal para servos |
1 x | XPower XC3522/5 LS |
2 x | SERVO DES 806 Pignons |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
2 x | Propeller 8x4 Electric |
2 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
3 x | Motor OS 3820-1200 electric |
2 x | SERVO DES 707 BB MG, Pignons |
1 x | XPower XC5030/14 LS |
2 x | Servo TT ACE SHV 1504 MG |
2 x | SERVO DES 658 BB MG |
2 x | Motor OS 3805-1200 electric |
2 x | SERVO DES 568 MG |
2 x | SERVO DES 806 Pignons |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Propeller 3x2 |
1 x | Propeller 9x4,7 SlowFlyer |
2 x | Propeller 11x4,7 SlowFlyer |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | Micro control horn T2 Ø 1 |
1 x | Rudder forward 80x28 "type Kato" |
2 x | 6 mm M3 variable inclined horn |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | 5 mm M2 variable inclined horn |
2 x | Horn mando small (2 pcs) |
1 x | Washer 2.2×4 |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | 5 mm Prop Adapter M6 |
2 x | 3 mm Short Prop Adapter M5 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Head core |
1 x | Head lower part |
1 x | Cierva C30 Body Spain |
1 x | Head upper part |
1 x | Head runner |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | SUPER DIMONA TC-80 |
1 x | Threaded coupler M2 (10 uds) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Wire easy tensioner (red) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | wire tensioner (black) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | wire tensioner (silver) |
1 x | Head spacer |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Servo TOPMODEL DS9010 T |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 45 mm gas motor standoff |
1 x | 10 mm gas motor standoff |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | 4 mm Prop Adapter M6 |
1 x | Lock nut M5 (10 pcs) |
1 x | Long adjustable control horn with bearing |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | SERVO DES 588 BB MG |
1 x | Aluminium battery holder red |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Aluminium ignition bad (red) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | 3 mm Prop Adapter M6 |
1 x | 18 mm wing servo holder |
1 x | Servo TOPMODEL DS1413 T |
1 x | 50x45 mm micro-mini servo cover |
1 x | 11 mm wing servo holder |
2 x | Servo HBS 690BB HV Digital |
1 x | MB-339 Aermachi 84" ARF c/retractil electric |
1 x | 5 mm M2 variable horn |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horns indoor |
1 x | Control horn long w/ball |
1 x | Long extra-strong control horn with bearing 2,8x34 |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Servoarm Aluminium SH-82 |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 30 mm gas motor standoff |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium ignition bad (blue) |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 25 mm gas motor standoff |
1 x | 12 mm floating pad (49 pcs) |
1 x | MIG AC 400 /14 |
|
9,145.80EUR |