1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Cockpit plastic closing |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Covered closure or fairings |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Ferrita 17x10x6.5 mm |
2 x | Ferrita 27x14x7 mm |
1 x | Ferrita 14x8x5.5 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Marker ties (20 pcs) |
2 x | Tape GFK 25 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | 2 LiPo XH>EH adapter |
1 x | JETImodel SINGLE BEC |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Smoke set "S" |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | 100 mm rods set for direction control |
1 x | SkyMaxx 1.550 mm (kit) |
2 x | Pilot Lotsenboot |
1 x | Cockpit aluminium closing 4.7g |
2 x | MAULE M-7-420 2.8m Red |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Cockpit metalic closing |
1 x | Antonov AN2 Scale 1/6 - 3m |
2 x | Cable grommet Ø 4 mm (4 uds) |
3 x | Me-163 |
2 x | ROBIN S50E BLUE/WHITE |
1 x | Window mounting channel 5m |
1 x | WINGO 2 ARF |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Skyray (RBC Kits) |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Parachute expulsion foam |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | DRACO 2.0m BNF |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | Cockpit aluminium closing 5.4g |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Snap short M2 (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | 28 mm turnbuckle |
1 x | 20x200 mm battery rings |
1 x | 3 mm Leader (L 100 mm) |
1 x | 45 mm flag mast |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | 33,0 mm propeller (left propeller) |
2 x | Ferrita con funda |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Shaft sleeve LAMA |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | X-RAY Micro QR (Rudder) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | T-shape holder metal LAMA |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | 3 mm Short Prop Adapter M5 |
2 x | Balsa panel 2.0x100x1000 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | Rocket D3-P |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | 290 mm M5 Prop shaft |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | EDGE 540 V3 (Superlite) ORANGE |
1 x | EDGE XL Orange |
1 x | Guide capes 25 mm (2 pcs) |
1 x | FunCub NG azul RR |
1 x | FunCub NG verde RR |
1 x | WINGO 2 PNP |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | PC-21 XXL 3.395 mm |
1 x | Remote electric ignition system |
1 x | BD-5J PNP |
1 x | Parachutist |
1 x | VIPER SL Gold PNP 2270 mm |
1 x | MIRAGE 2000 Camuflage PNP |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | SCHOCKJET ARF 2.050 mm |
2 x | Birch plywood plate 600x300x1.2 mm |
1 x | PIX Hawk with accesories |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | ASG 32 560 mm |
1 x | REVOLTO Blue |
1 x | BETA 1400 RTF Red |
1 x | BETA 1400 ARF Red |
1 x | Equipment set XL |
1 x | Farol Ms. 3v/10 mm |
1 x | VIPER JET G2 Esq. 2 White/Red |
1 x | Guide capes 20 mm (2 pcs) |
1 x | Focos Ms 4 mm (10 pcs) |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | PPM Encoder Module |
1 x | Tube Pitot to PIXHAWK |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Flybar support metal LAMA |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Landing lights 18 mm (0.71in) |
1 x | Resistor 3W 5% OR82 |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Resistor 3W 5% OR47 |
1 x | USB Interface Adapter |
1 x | Combo lighting module with covering drop shape |
1 x | Combo lighting module with covering drop shape |
|
31,640.67EUR |