| 1 x | Connector Sub-D 2+5 Female |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 4 LiPo XH>EH adapter |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 03 |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | UBEC 6A KAVAN |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | CC 05 |
| 1 x | CC 01 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | CC 02 |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Connector CAN 15 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | BEC 3A FOXY |
| 1 x | 30 cm BEC cable (female) |
| 1 x | DPS Switch JR/JR |
| 2 x | Circlick securite |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 2 x | Round Rod 1,25x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 2 x | Round Rod 1,0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | Round Rod 5,0x1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 3 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 2 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 2 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | Wheel FEMA 100 mm / 6 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Vacuum pump P1-N |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | RANGER Jet CANADA 1.854mm combo |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | Nose wheel 62 mm |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | LiPo Storage Box Standard 1 Type 1 |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | MPX Support (2 pcs) |
| 2 x | PVC yellow battery termo-retract 69 mm (10 m) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 2 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | PVC lilac battery termo-retract 70 mm (10 m) |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 1 x | PVC red battery termo-retract 68 mm (10 m) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
| 2 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Red 4 mm connector holder |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 2 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | RANGER Jet NAVY 1.854mm combo |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Boomerang SPRINT V2 Red/Yellow |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
| 1 x | DUPLEX Satellite receiver Rsat 900 |
| 1 x | DUPLEX R14 receiver 2,4GHz |
| 1 x | DUPLEX R12 EPC receiver 2,4GHz |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Tool for entel |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
| 1 x | NoNa BB wheel Ø175x55mm in pair |
| 1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
| 1 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Receiver DUPLEX R9 EX 2.4 GHz |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Receiver DUPLEX R5L EX 2.4 GHz |
| 1 x | DUPLEX R6 EX receiver 2,4GHz |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
| 1 x | Receiver DUPLEX R3L EX 2.4 GHz |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | DUPLEX R7 receiver nano 2,4 GHz |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Receiver DUPLEX REX 3 2.4 GHz |
| 1 x | Receptor DUPLEX REX R9 Slim Assit |
| 1 x | DUPLEX R7 receiver 2,4GHz |
 |
| 11,543.32EUR |
