3 x | Motor A2212/13T |
1 x | DUPLEX R10 receiver REX Assist |
1 x | DUPLEX R10 receiver 2,4GHz |
1 x | Battery FUTABA 18MZ |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | JETImodel Addcap 820 |
1 x | Switch Cap M (silver) |
1 x | Transmitter Balancer Futaba V |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Receiver bed (Blue) |
1 x | 3l Smoke oil |
1 x | 30 cm BEC cable (male) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Horn mando small (2 pcs) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Smoke set "S" |
1 x | Horn mando long (2 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | CC 05 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Ferrita 27x14x7 mm |
1 x | LOWER TOW HOOK |
1 x | Hovercraft sailcloth |
1 x | 1/4 Pilot "Heidi" |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Yellow smoke canister 100 g |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support Filtro FESTO |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Piloto jet 130 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 5 line servos wire black (1 m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Conector MR-60 (pareja) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
1 x | Receiver R7008HV comatible FUTABA |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Three-function control switch by FUTABA |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | FPV Station for SE TX-Tray V1 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Switch Cap M (red) |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Futaba Neckstrap |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Towing hook |
1 x | VARIO module Hott |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Digital scale up to 40 kg |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Dean "T" - Futaba Adapter |
1 x | 1/10 Pilot "Jack" |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | White smoke canister 140 g |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | 6 mm M3 variable horn |
1 x | R6106 HF 2,4 GHz receiver |
1 x | Propeller balancer |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Adjustable launching hook |
1 x | Digital precision scale up to 2000 g |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Xplorer3 anemometro |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Dean-T Plug Mold |
1 x | 1/6 Pilot "Cindy" |
1 x | Support Pitot JETI |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Receptor FUTABA R7003SB FASST |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | BEC 3A FOXY |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ASG 32 560 mm |
1 x | Wingstabi 9 DR M-Link Receiver |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | DUPLEX R7 receiver 2,4GHz |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | MT 125 temperature sensor |
1 x | FIALA Propeller 23x8 Electric |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX R7 receiver REX Assist |
1 x | Receiver RFA05 5Ch compatible FUTABA |
1 x | DUPLEX R7 REX receiver 2,4GHz |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | Suport PITOT |
2 x | Antenna holder bracket double |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Switch Cap L (Red) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Switch Cap L (Blue) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Switch Cap M (black) |
1 x | SWTU2 switch |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Switch Cap M (blue) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Neck strap Double V2 |
1 x | Decorative caps, multicoloured, short |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Remote electric ignition system |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Control horn long w/ball |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | 1/6 Pilot "Garry" |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Optical RPM Sensor |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | EC-Cutter |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Cut tube |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Extra long horn 60x30 |
1 x | Towing hook <3m |
1 x | Cable control set |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Receiver FUTABA R7108SB FASSTest/FASST |
1 x | Round Rod 1,0x1000 mm |
1 x | Blind nut M3 (4 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Dust collector for mould cleaning |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Suncover 100cc Red |
1 x | Battery charging cable XT60 |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Horn 6/20 with M3 Bearing |
1 x | 15 mm floating pad (30 pcs) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Field folding model stand |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Fixed launching hook |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Red smoke canister 140 g |
1 x | 2,5x60 mm allen screwdriver |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | CC 02 |
1 x | 20 mm carbon horn |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Green smoke canister 140 g |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Ferrita 14x8x5.5 mm |
1 x | "S" set for boats |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | 1/12 Pilot "Tom" |
1 x | Crimping tool |
1 x | 2,0x50 mm allen screwdriver |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Parachute expulsion foam |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Stickers-digit for marking |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Blind nut M4 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Adapter lead MPX/XT60 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | USB Mini Camera endoscope |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Jeti Black cap |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Green smoke canister 65 g |
1 x | Round Rod 5,0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Parachutist |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Round Rod 4,0x1000 mm |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Round Rod 1,5x1000 mm |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Adjustable brass horn threaded M3 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Cable with accesories |
1 x | Horn for flap control (1 pcs) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Red smoke canister 65 g |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | CC 01 |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Ventral support for AX-18/AX-60 |
1 x | Field folding model stand SebArt |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Ferrita con funda |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Round Rod 2,5x1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Connector Sub-D 2+5 Male |
1 x | Copier 5x20 cm pcs |
1 x | Connector CAN 15 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Blind nut M5 (4 pcs) |
1 x | PCARD Wireless System |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Cable Cargador FUTABA |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | 6 mm aluminium horn with patella |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Green smoke canister 100 g |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Support conector MPX (6 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | White smoke canister 100 g |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Medidor ángulos y/o incidencias |
1 x | |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Pilot "Anthony" (Slimline) |
1 x | Surface Indicator Gauge Small |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Conector MT-60 (pair) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Conector JR Servo female (10 pcs) |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Conector JR Servo male (50 pcs) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
|
13,645.44EUR |