| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | JM electric Pump |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Xplorer2 anemometro |
| 1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Nitroverdu 500 ml |
| 1 x | White smoke canister 140 g |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Blue smoke canister 100 g |
| 1 x | Propeller balancer |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | GLOW 2C + accesories |
| 1 x | Compact on-board starting system (9724) |
| 1 x | Premium servo extension 50cm |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Selfstarr EME35 |
| 1 x | Compact on-board starting system (9713) |
| 1 x | Paint gun for sprays |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | CC 01 |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Stickers-digit for marking |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Deposito DUBRO 360 ml - 12 oz |
| 1 x | double Fuel Dot V2 (silver) |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | 500 ccm complete gasoline fuel tank |
| 1 x | PowerBox Smokepump |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | 7.94 x 4.76 mm tygon tube 1 m |
| 1 x | PowerBox Smokepump JETs 2x outside |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Aluminium ignition bad (blue) |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | White smoke canister 65 g |
| 1 x | |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Angle measurer |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Cut tube |
| 1 x | CC 05 |
| 1 x | Crimping tool |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Copier 2x20 cm pcs |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Digital scale up to 40 kg |
| 1 x | 700 ml complete glow fuel tank |
| 1 x | Check valve quick hose connector 4-4 mm |
| 1 x | |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Canopy Latch |
| 1 x | Propadapter for motor A50 |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Optical RPM Sensor |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Smoke pump RCEXL |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | Gasket electric Fuel Pump |
| 1 x | Electric Fuel pump |
| 1 x | Ferrita con funda |
| 1 x | 22m Fitting barb |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | 140 mm rods set for direction control |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Electric Fuel Pump 12v |
| 1 x | Allen wheel collar M3x5 |
| 1 x | KAVAN Hand crank fuel pump |
| 1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | "S" set for planes |
| 1 x | Smoke set "M" |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | RCEXL Electronic ignition twin A-02 |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Parachute expulsion foam |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Ignition bed V2 Red color |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Xplorer1 anemometro |
| 1 x | 1/6 Pilot "John" |
| 1 x | Electromotor starter EME 35cc |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Smoke set "Glider" |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Xplorer3 anemometro |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Blue smoke canister 140 g |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | 20 g tin paste |
| 1 x | EME 55 cc carburetor WALBRO |
| 1 x | Field folding model stand |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | USB Mini Camera endoscope |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | PPM Encoder Module |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | BEC 3A FOXY |
| 1 x | USB HLS prog. interface |
| 1 x | TrainerCord (master-learner) |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CC 03 |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Circlick securite |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Vacuum pump P1-N |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | CC 02 |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
 |
| 9,531.88EUR |
