1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Big Crow DLE-170M |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | USB Mini Camera endoscope |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Gates hinge |
1 x | Small pinned hinge (12 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Interface Realflight Simulator |
2 x | RF9 Flight Simulator with Spektrum Controller |
2 x | Slave-cable USB Easy Sim |
1 x | Gates hinge aluminium (1 pcs) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | GameCommander USB Universal |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Interface Jack Adapter IKARUS |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Metal gear set for HS85MG/5085MG |
2 x | Horns set HS-65HB/MG, 5065MG |
1 x | Servo arms set HS-65HB/MG/5065MG |
2 x | Metal gear set for HS81MG/5082MG |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Fast attachment for servos (25 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | 1/4 Pilot "Heidi" |
2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Motor DLE 170 M- Paramotors |
1 x | T-Hose connector 6-6-6 mm |
1 x | Quick hose connector 4-4 mm |
1 x | 40 mm air cylinder |
1 x | T-Hose connector 4-4-4mm |
1 x | Tailwheel for 1-3 kg models |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Air pressure gauge |
1 x | Tap FESTO 4-4 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Tap FESTO 6-6 mm |
1 x | Fail Safe air retract |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Tailwheel for F3A size |
1 x | Quick hose connector 4-4 mm |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Y-Hose connector 4-4-4mm |
2 x | Manometer 4 mm |
1 x | 460 mm EPP Floats |
2 x | Motor DLE 200cc Std |
1 x | Y-Hose connector 3-3-3 mm |
2 x | Quick hose connector 6-6 mm |
1 x | Trailing leg 131 mm |
1 x | Tren de cola carbono 50-70cc |
1 x | SU 29S 140 carbon landing gear |
1 x | Small Crow DLE-170M |
1 x | Indoor landing gear set |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
2 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Medium pin type hinge (12 uds) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | 25 mm carbon servo arm |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Servos security connector (2 pcs) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Round Rod 1,5x1000 mm |
3 x | Round Rod 1,25x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Servo Mount S (red) |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Quick hose connector 3-3 mm |
1 x | Decorative caps, multicoloured, short |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | NF-3m Heli Kit |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | NF-2 RC set |
1 x | NF-3X-350 set |
1 x | NF-1 RC set |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | NF-3 RC set |
1 x | NF-3X-80 liner Kit |
1 x | Flap hinge (6 pcs) |
2 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Tailwheel for 60/120 size |
1 x | Tail gear set (60-120 class) |
1 x | Racor 2/3 mm |
1 x | Y-Hose connector 6-6-6 mm |
1 x | POLARON EX 800w charger |
1 x | Servo BLS-M55B 61.2kg |
1 x | T-Hose connector 3-3-3 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Z-shaped servo mount |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Mini Infrared Thermomiter |
1 x | Spikes Band (5 m) |
1 x | Decorative caps, multicoloured |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | NF-3XL set |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Cable coupler M2x66 (2 uds) |
1 x | wire tensioner (red) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | Wire easy tensioner (red) |
2 x | IMPULSE 2 F3F |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Round Rod 2,0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
2 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | VBar Control Touch, midnight black |
1 x | LOGO 600 SX (kit) |
1 x | VTX 477 Carbon Rotorblade |
1 x | Tail boom brace LOGO 480 |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | VBar Control RX-Satellite |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Servo Mount M (blue) |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | ABS I Strip 10x5x1000 mm |
2 x | Round Rod 2,5x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 3,0x1000 mm |
|
29,996.31EUR |