| 1 x | 1/4 Pilot "Heidi" |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Z Bender - S Type Tool |
| 1 x | |
| 1 x | Z Bender - S Type Tool |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Cable control set |
| 1 x | DUPLEX 2.4EX MT 300 EX |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | DUPLEX MUI 50 Sensor |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Oracover Verde 2 m |
| 1 x | Receiver R6008HV-A comatible FUTABA |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Oracover Brown 2 m |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
| 1 x | BlueCom™ Adapter (Android / WP) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Futaba Neckstrap |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | Horn with ball 55x40 |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | DUPLEX 2.4GHz GPS |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Premium servo extension 50cm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Xplorer1 anemometro |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Xplorer3 anemometro |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Flybar support metal LAMA |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Receiver CORE PBR-26D 26ch |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Piloto jet 130 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Vasa model Catapult |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Angle support XT60 conector |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Support pump Xicoy X45 |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Switch Cap L (silver) |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Neck strap Double V2 |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | DUPLEX 2.4EX MULi 6s M |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Connector CAN 15 |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | DPS Switch JR/JR |
| 1 x | Futaba Radio Case |
| 1 x | External LED's (2 pcs) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Cable with accesories |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Receiver FUTABA R7108SB FASSTest/FASST |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Short ball link M2 (6 uds) |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Spikes Band (5 m) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Receiver GRAUPNER GR-12 HoTT |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Tape GFK 38 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Cinta Goldfix 1m |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | 1/6 Pilot "John" |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Vacuum pump P1-N |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Dust collector for mould cleaning |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Cut tube |
| 1 x | Digital scale up to 40 kg |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Optical RPM Sensor |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Ball Link Plier |
| 1 x | Ball Link Plier |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Angle measurer |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
| 1 x | CC 05 |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | CC 02 |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Receiver RFA05 5Ch compatible FUTABA |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Oracover Azul 2 m |
| 1 x | One touch canopy lock |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Decorative caps, multicoloured |
| 1 x | PowerBox Smokepump |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | DUPLEX 2.4EX MU 3 Sensor |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
 |
| 9,746.48EUR |
