| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 3 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | TrainerCord (master-learner) |
| 2 x | Circlick securite |
| 2 x | CC 05 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | Cabel charger transmitter GRAUPNER |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | 5 LiPo XH>EH adapter |
| 2 x | CM-3 |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | 4 LiPo XH>EH adapter |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | CC 01 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Propeller balancer |
| 2 x | Propeller balancer |
| 2 x | Surface Indicator Gauge Small |
| 2 x | Medidor ángulos y/o incidencias |
| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 3 x | Angle of incidence meter |
| 1 x | Field folding model stand SebArt |
| 2 x | Angle measurer |
| 3 x | Field folding model stand |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Opale Rucksack |
| 1 x | Z Bender - S Type Tool |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Film release agent PVA 25 ml |
| 2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | CC 02 |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Connector CAN 15 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | EWC6 40 cm wing connector |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | CC 03 |
| 1 x | SPARK Switch 7.4v |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | EWC3 100 cm wing connector |
| 1 x | 30 cm BEC cable (male) |
| 1 x | JETImodel Addcap 1640 |
| 2 x | FX three-position switched channel, long |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Parachute P4 |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | TS832 to Gopro AV/Power Cable |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | EDGE 540 1.73m SEAGULL Model |
| 1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Extension 5 lipos JST/C |
| 1 x | PSC 5 |
| 1 x | Xoar Electric Beechwood Prop 16x7 |
| 2 x | MAX BEC 2 |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Y-Hose connector 3-3-3 mm |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | Tap FESTO 6-6 mm |
| 1 x | ULTRA STICK 30 cc ARF |
| 1 x | Fail Safe air retract |
| 1 x | Wheel cover holder Ø 6 mm (2 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Body for landing gear Ø 4 mm |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Y-Hose connector 2-2-2 mm |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Y-Hose connector 6-6-6 mm |
| 1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Landing gear strap large (4 uds) |
| 1 x | Wheel cover holder Ø 3 mm (2 uds) |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | ARS 300 91" ARF 2311mm ORANGE |
| 1 x | EDGE 540-A 91" (2310 mm) |
| 1 x | Wheel cover holder Ø 4 mm (2 uds) |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Air pressure gauge |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Z-shaped servo mount |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Tail wheel for 8-12 kg models |
| 1 x | 28 mm tailwheel unit |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Tailwheel for F3A size |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
| 1 x | POLARON EX 800w charger |
| 1 x | Xoar Electric Beechwood Prop 15x8 |
| 1 x | SBEC Jeti |
| 1 x | Electronic switch JETI SP06 Opto |
| 1 x | SPS 70V 140/280 A |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Telemetry JETI |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Male connector for 16 pines AWG |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
| 1 x | CC 11 Conector |
| 1 x | Fod Guard 73x32 mm |
| 1 x | Jet Pipe 160N-250N (120/130 mm) |
 |
| 19,617.16EUR |
