2 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Ball link M3 (10 pcs) |
1 x | Surface Indicator Gauge Small |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | USB Mini Camera endoscope |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | Tube support Ø 6mm (10 pcs) |
1 x | Rubber profile 8-2 mm 2M |
2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Extension PVC 150 cm (Graupner) |
2 x | Recessed MPX connector support (6 pcs) |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | Profile ABS half cane 2.5x1000 mm |
3 x | ABS angle 5,0x5,0x1000 mm |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 35 cm male (Futaba) |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | ABS angle 3,0x3,0x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Spray Graphit 33 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Partall paste 650 g |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Spray adhesive AEROFIX 2 |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
4 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | "M" set |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Green smoke canister 65 g |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Red smoke canister 140 g |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Remote electric ignition system |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | White smoke canister 100 g |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | 110x55 mm SLH KOVO wheel |
3 x | 120x60 mm SLH KOVO wheel |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | Futaba Female 40 cm extension |
2 x | Support FUEL DOT V3 |
2 x | Support Antena 2.4 Ghz (2 pcs) |
2 x | Circlick securite |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Extension 100 cm (Futaba) |
2 x | Support XT60 conector (2 pcs) |
2 x | Support Pitot JETI |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Premium servo extension 50cm |
2 x | Support Filtro FESTO |
1 x | Premium servo extension 25cm |
1 x | Angle support XT60 conector |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC D645 MW |
2 x | Gear set HITEC HS-225 |
3 x | Servo HITEC D941 TW |
2 x | Gear set HITEC HS-55 |
1 x | Servo HITEC HS-225 MG |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | ABS angle 4,0x4,0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Profile ABS Square 4 x 1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
3 x | 300 Newtons FEMA absorber |
4 x | 200 Newtons FEMA absorber |
1 x | 76 mm light wheels (2 pcs) |
2 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Suncover 100cc Red |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
4 x | Absorver mount set for 5-10 Kg models |
2 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | VPP system propeller for AXI VPP motors (spare) |
2 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | 90x45 mm hard foam KOVO wheel |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
2 x | 60x25 mm tail wheel "type F3A" |
3 x | 76x23 Ø3.5 mm aluminium core wheel |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
2 x | 150 Newtons FEMA absorber |
2 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
2 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Prolongador S-Bus JR/JR 10cm |
4 x | Telemetry interface ALTIS to Futaba |
2 x | Soporte grifo FESTO (2 pcs) |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Extension silicon 10 cm (Futaba) |
2 x | Fiberglass plate 350x150x1.5 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Fiberglass plate 620x540x2,0 mm |
2 x | Fiberglass plate 350x150x2.5 mm |
2 x | Foam plastic plates (310x210x3 mm) |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Extension 15 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
2 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Premium servo extension 75cm |
1 x | GPS Altis |
2 x | Film release agent PVA 25 ml |
1 x | Release film 100 cm x 50 m |
1 x | Futaba Female 40 cm extension |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Telemetry interface ALTIS 6 cm |
1 x | Extension lead 15 cm Multiplex |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Altimeter Altis NAO |
1 x | Telemetry interface ALTIS 12 cm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Cabel "Y" 15 cm |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Fiberglass plate 620x540x1,0 mm |
1 x | Extension 90 cm (Futaba) |
2 x | Support pump Xicoy X45 |
1 x | Support conector MPX (6 pcs) |
1 x | Futaba male 40 cm extension |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Extension 7.5 cm |
2 x | Device Terminal |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Fiberglass plate 620x540x0,3 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Premium servo extension 100cm |
1 x | Extension 30 cm (Futaba) |
4 x | Servo HITEC D85 MG |
2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
3 x | Servo HITEC D954 TW |
3 x | Gear set HITEC HS-85 |
2 x | Servo case HS-225MG/225BB/5245MG |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Servo HITEC HS-225 BB |
2 x | Servo HITEC D-955 TW Titanium |
3 x | Servo HITEC HS-311 |
2 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
2 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
3 x | Servo HITEC D145 SW |
3 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
3 x | Servo HITEC D951 TW |
3 x | Screws set for Hitec MG arms servo |
1 x | Gear set HITEC HS-311/322/325BB |
2 x | Servo HITEC HS-125 MG |
3 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Gear set HITEC HS-7950TH |
2 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | Servo HITEC HS-5585MH |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC HS-45 HB |
1 x | Gear set HITEC HS-56 HB |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
2 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Servo HITEC D625 MW |
1 x | Yellow smoke canister 140 g |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Propeller CFK 15x13 |
1 x | Motor XPower F2915/12 XLight |
1 x | Motor Advance 30-10 F3A |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Baseplate servo |
1 x | Z Bender - S Type Tool |
1 x | AC-10 pre-rotacion with motor |
1 x | Mig-29 "FULCRUM" (RBC Kits) |
1 x | 1/12 Pilot "Langley" |
1 x | 20 mm carbon horn |
1 x | Contacto macho pin conector (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Adapter lead MPX/EC3 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Propeller CFK 17x13 |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 18x17 |
1 x | Propeller CFK 15x15 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Program card KAVAN PRO |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 15.5x10 |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | 1/12 Pilot "Tom" |
1 x | 18m Fitting barb |
3 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 25 mm carbon servo arm |
1 x | 1/7 Pilot "Japanese" |
1 x | 1/10 Pilot "Jack" |
1 x | 1/6 Pilot "Tony" |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/12 Pilot "Fighter" |
1 x | 1/6 Pilot "John" |
1 x | 280 cc gasoline fuel tank complet |
1 x | 20x200 mm battery rings |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 1/10 Pilot "Jimmy" |
1 x | 22m Fitting barb |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo HITEC HS-56 BB |
1 x | Servo HITEC HSB-9370TH |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | Servo HITEC HS-7245MH |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Brake for 140 mm wheels |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | Kardan Black (without pinions) |
4 x | 400 Newtons FEMA absorber |
2 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Altimeter Altis V4 |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
2 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | Plastic wheels 36 mm (2 pcs) |
2 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | JETCAT ADITIVO ANTIESTATIC 120ml |
2 x | Servo HITEC HS-485 HB |
1 x | Interface Jack Adapter IKARUS |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Servo HITEC HS-65 MG |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | 18x10 BIELA propeller |
1 x | 28x12 BIELA 3Bl Pusher propeller |
1 x | 26x18 BIELA propeller |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | Servo HS-5765MH High Voltage |
1 x | Extension silicon 50 cm (Futaba) |
1 x | 23x8 BIELA propeller |
1 x | 24x8 BIELA propeller |
3 x | Servo HITEC D950 TW |
1 x | Servo HITEC HS-5084 MG |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Glass fabric 25 g (2 m²) |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
2 x | Wheel FEMA 178 mm / 8 mm |
1 x | USB interface ALTIS |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Foaming agent for epoxy resins 200 g |
1 x | PU aircraft tyre, 45x16x3 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
2 x | Wheel 22 mm |
1 x | Gear set HITEC HS-81 |
1 x | Fod Guard 94x32 mm |
1 x | Fod Guard 83x32 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Pipe Jet REVEL titanio/aluminio |
1 x | FIALA Propeller 18x8 |
1 x | Servo HITEC HS-85 BB |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Servo HITEC HS-785 HB |
1 x | Servo HITEC HS-5685MH |
1 x | Servo HITEC HS-85 MG |
1 x | 17x8 BIELA propeller |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 22x8 BIELA propeller |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Servo HITEC HS-53 |
1 x | 22x10 BIELA pusher propeller |
1 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
2 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Wheel 18 mm |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Compact on-board starting system (9715) |
1 x | Compact on-board starting system (9512) |
2 x | Nose wheel 62 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Mudguard wheels 112/127 mm |
1 x | Hardener Aero EPH 161 (250 g) |
2 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Compact on-board starting system (9713) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Keypad ALTIS V4 |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Superlight deluxe wheel 68 mm (2 pcs) |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Lightweight aircraft wheel, 55x18.5x3 |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | 3.2 mm Prop Adapter M8 |
1 x | NoNa BB wheel Ø150x45mm in pair |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Chopped glass fibre strands 3 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Gear set HITEC D645 MW |
1 x | Extension MPX-MPX 20 cm |
|
23,989.61EUR |