| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Yellow smoke canister 140 g |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Yellow smoke canister 100 g |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | "S" set for planes |
| 1 x | 3l Smoke oil |
| 1 x | Green smoke canister 65 g |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Smoke set "M" |
| 2 x | Electric rocket starters (6 pcs) |
| 2 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Tape GFK 38 mm |
| 1 x | Blue smoke canister 140 g |
| 1 x | Green smoke canister 140 g |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | "M" set |
| 1 x | Remote electric ignition system |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | Green smoke canister 100 g |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Yellow smoke canister 65 g |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Smoke set "S" |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Parachutist |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Crimping tool |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Conector MR-60 (pareja) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 2 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Hot Glue Stick RED |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Crimping tool |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Ball Link Plier |
| 1 x | Digital precision scale up to 2000 g |
| 2 x | Vacuum pump 12 CFM |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Cut tube |
| 1 x | Z Bender - S Type Tool |
| 1 x | USB Mini Camera endoscope |
| 1 x | 800TVL CMOS camera for FPV |
| 2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Glases Aspen |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | IKURA 4.0 m |
| 2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 4/3 |
| 2 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Steering lever |
| 1 x | Cierva C30 Body Spain |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Racor 2/3 mm |
| 1 x | ESC MEZON 115 Opto |
| 1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
| 1 x | Refueling Cap V3 Black |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
| 1 x | Blind nut M4 (10 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | |
| 1 x | Race Outboard MERCURY type A |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | BOX-Setup Actro-marine |
| 1 x | ESC Actro-Marine 30A |
| 1 x | Pump hose (Ø 6/8 mm) transparent |
| 1 x | Servo Dymond D 37 Eco |
| 1 x | Servos security connector (2 pcs) |
| 1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | Gear for D 200 BX |
| 1 x | Reguladro ACTROCON 60A |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 1 x | Digital scale up to 40 kg |
| 1 x | 25 mm carbon servo arm |
| 1 x | ALPHA 1000mm BL ARTR |
| 1 x | Servo BMS-4112 |
| 1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | Servo KST A08H V6.0 3,2Kg HV |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Ball Link Plier |
| 1 x | Gear for D 54 |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Landing gear Rocket 400 |
| 1 x | LA500 housing-lower cyclic |
| 1 x | LA500 housing-upper cyclic |
| 1 x | LA500 front gear holder |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | LA500 Autogyro |
| 1 x | Bungee HLG Premium |
| 1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
| 1 x | Propeller set 400 (2R+2L) |
| 1 x | LA500 Blades |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | LA500 pre-rotation gear |
| 2 x | LA500 nose |
| 1 x | LA500 pilot-seat set |
| 1 x | LA500 rotor head shaft |
| 1 x | LA500 ciclic lever |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Motor rotor LA-500 |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | Covered closure or fairings |
 |
| 10,938.93EUR |
