1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Cockpit aluminium closing |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
3 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
3 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
3 x | Locking cable tie 2.5x100 (uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
3 x | Steering arm 12 mm Ø 4 mm |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Allen wheel collar M3x5 |
3 x | Cierre cabina aluminio Ø4, I=10 mm |
3 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 28x5 mm wires output (2 pcs) |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | 250 mm / 16 mm Airbrakes |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | 45 mm rods set for direction control |
3 x | Cable grommet Ø 4 mm (4 uds) |
3 x | 38x4,5 mm wires output (2 pcs) |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 80 mm rods set for direction control |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Clip fixing for wing (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Medidor ángulos y/o incidencias |
2 x | Surface Indicator Gauge Small |
1 x | Strip 1,5x1,5x330 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Angle measurer |
2 x | Round Rod 2,0x1000 mm |
1 x | WingFix ULTRA Black Edition |
2 x | Angle of incidence meter |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
3 x | Round Rod 2,5x1000 mm |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
3 x | Round Rod 1,5x1000 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Tape GFK 50 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Tape GFK 38 mm |
1 x | Spikes Band (5 m) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Cockpit plastic closing |
1 x | Snap pin for micro clevis (10 uds) |
2 x | Snap for floding prop for 2 mm axi |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Control for forward wheel (MINI) |
1 x | Red smoke canister 65 g |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Conector JR Servo female (10 pcs) |
1 x | Connector CAN 15 |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Universal Colour Paste deep black 50 g |
2 x | Snap short M2 (10 uds) |
1 x | Split M1,2x10 (10 pcs) |
3 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
5 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
2 x | Propeller balancer |
1 x | ABS Strip 1.5x2.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | L-shaped servo mount |
1 x | Round Rod 4,0x1000 mm |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Marker ties (20 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Covered closure or fairings |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 30x14 prop Super Silence |
1 x | 3-blades 30x12 carbon prop Super Silence |
2 x | 4 blades set |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Lead with adhesive (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 28x12 prop Super Silence |
1 x | 29x12 prop Super Silence |
1 x | |
1 x | 100g Flux Paste for Silver Solder |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | Fully Threaded Steel Rod M3 |
1 x | Cockpit aluminium closing 4.7g |
1 x | Pushrod octagone 4/3 |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Servo holder for retract |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Support pump Xicoy X45 |
2 x | Antonov AN2 Scale 1/6 - 3m |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
3 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
2 x | Mudguard for 140/165 mm wheels |
1 x | Snap long M2 (10 uds) |
2 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | One touch canopy lock |
1 x | Support Pitot JETI |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Gates hinge |
2 x | Round Rod 3,0x1000 mm |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | VTX 477 Carbon Rotorblade |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | Logo 400 SE VBar |
1 x | Tail tube RAINBOW |
2 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Futaba 2x20 mm servo double arm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Screw M2x8 (10 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Header ZG 45/62, "wide" |
1 x | Cylinder head, left for VM 170/210 |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | BULL MØ1 2.600mm YELLOW |
1 x | Shirt Hispano Aviación |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | BULL MØ1 2.600mm BLUE |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | 3 blades set |
1 x | Blade Holder Full (4 blades) |
1 x | Blade Holder (3 blades) |
1 x | Blade Holder Full (3 blades) |
1 x | Fuselage Autogyro RAINBOW |
1 x | Crystal Universal RX 35.070 Ch 67 |
2 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Support XT60 conector (2 pcs) |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Support conector MPX (6 pcs) |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Window mounting channel 5m |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support pumb/filter Xicoy X45 |
1 x | Tube support Ø 6mm (10 pcs) |
|
30,565.09EUR |