1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Universal Colour Paste white 50 g |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Decorative caps, multicoloured, short |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
3 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | 1/12 Pilot "Langley" |
1 x | 1/10 Pilot "Jimmy" |
3 x | Clip fixing for wing (2 pcs) |
2 x | 6 mm Quick clamp_S (10 pcs) |
3 x | CC 03 |
1 x | Extension silicon 10 cm (Graupner) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 30 cm BEC cable (male) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | 20 mm carbon horn |
3 x | Dean "T" - Futaba Adapter |
1 x | Extension lead 15 cm Multiplex |
3 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | RH long aluminium horn (2pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Cinta Goldfix 1m |
1 x | Horn for flap control (1 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Angle support XT60 conector |
1 x | Long ball link M1.6 (6 uds) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Joint with bearing M2 22x5,5 |
2 x | Ball link M1.6 (6 uds) |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | 45 mm black plastic spinner for fixed propeller |
2 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | VIPER SL YELLOW PNP 2270 mm |
1 x | BD-5J PNP |
1 x | PC-21 2880 mm Electric Landing Gear |
1 x | BD-5J ARF+ |
1 x | Boeing (TX) T-7A RED HAWK |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | JP Hobby ER-120 Tricycle FELIX JR |
1 x | MB339 CANADA PNP 1790 mm |
1 x | PC-21 2.880 mm BLUE French Army Scheme |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART) |
2 x | 1/12 Pilot "Fighter" |
1 x | 1/7 Pilot "Japanese" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Catalog AERO-NAUT 2016 |
2 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
3 x | 38x4,5 mm wires output (2 pcs) |
2 x | Allen wheel collar M3x5 |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Circlick securite |
2 x | Regulador Jeti Jes 045 |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
3 x | Allen wheel collar M4x6 |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | 6 mm M3 variable horn |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Short Switch On/Off micro |
2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Extension MPX-MPX 20 cm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Protective Cover for wires Ø 3 mm 1000 mm |
2 x | 140 mm rods set for direction control |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Cable grommet 9.5 mm (4 uds) |
3 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 45 mm rods set for direction control |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
3 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Allen wheel collar M3x3 |
2 x | 80 mm rods set for direction control |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Clip mini fixing for wing (2 pcs) |
3 x | Cap closure 33/23.5mm (2 uds) |
3 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 100 mm rods set for direction control |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Connector CAN 15 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Connector Sub-D 2+5 Female |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Cabling for Fox MDM1 wings |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 3 LiPo XH>EH adapter |
2 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | CC 02 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | CC 01 |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Cockpit plastic closing |
2 x | Snap long M2 (10 uds) |
1 x | Allen wheel collar M4x4 |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | CM-3 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Snap short M2 (10 uds) |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | 2 LiPo XH>EH adapter |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Adapter lead MPX/XT60 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Canopy Latch |
2 x | Landing gear frontal support 25x32x16 |
2 x | 30 cm BEC cable (female) |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Snap pin for micro clevis (10 uds) |
1 x | Connector Sub-D 2+5 Male |
2 x | 4 LiPo XH>EH adapter |
2 x | Lead with adhesive (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Horn mando small (2 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 5 mm M2 variable horn |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | SBEC 40 |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | SWTU2 switch |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Opto Gas Engine Kill Switch |
1 x | MAX BEC |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Spinner 82mm Black ventilado |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Ball link M2 (10 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Parachute PV6 for F3J |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Nut for 515/518/519 spinner special for Hacker |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | F3A carbon 95 mm spinner |
1 x | Spinner INOVA 102 mm Black |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | SERVO HOLDER |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | DPS Switch JR/JR |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Extension for SensorSwitch 60cm |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | A50 Motor Mount Alu complete set |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Axle for motor A30-XL V2 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | One touch canopy lock |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Selfstart electronic switch |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Female connector for 10 pines AWG |
1 x | EWC3 40 cm wing connector |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | MicroMatch PowerBox |
1 x | Charging Extension 50cm for 2 Battery |
1 x | BlueCom™ Adapter (iOS) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Esc MasterBasic 70SB |
1 x | Bearings for motors hacker A50 |
1 x | Esc MasterBasic 90 Opto |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | 500 ccm gasoline fuel tank |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod M3 |
1 x | 22x10 prop Super Silence |
1 x | Male Prolonger TP 4/5S |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | SPS Remote switch actuator |
1 x | PowerBox SparkSwitch RS |
1 x | Cockpit aluminium closing |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Female connector for 16 pines AWG |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | JETImodel Addcap 1640 |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Combo lighting module with covering drop shape |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Heat sink for Optotronix LEDs |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | USB interface ALTIS |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Battery charging cable XT60 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | DPSI Ampere battery backer |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
|
25,915.67EUR |