1 x | DUPLEX 2,4GHz MRPM EX |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Switch Cap M (black) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | 25 mm reinforced hinge |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Red smoke canister 100 g |
1 x | Initior Receiver FRX2 Wireless |
1 x | Copier 2x20 cm pcs |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Spray adhesive AEROFIX 2 |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | WingFix ULTRA Black Edition |
1 x | Propeller balancer |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Universal Colour Paste deep black 50 g |
1 x | Yellow smoke canister 65 g |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Smoke set "Glider" |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 3,0x60 mm allen screwdriver |
1 x | 5 mm M2 variable horn |
1 x | |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Horn 6/27 with M3 Bearing |
1 x | 1/12 Pilot "Cougar" |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Ball Link Plier |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | 1/4 Pilot "Mike" |
1 x | 5 mm M2 variable inclined horn |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | "S" set for boats |
1 x | Spray Graphit 33 |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Field folding model stand |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Parachute expulsion foam |
1 x | Smoke set "M" |
1 x | DUPLEX MUI 50 Sensor |
1 x | Battery FUTABA 18MZ |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Switch Cap L (Blue) |
1 x | Switch Cap M (silver) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Universal Colour Paste deep black 250 g |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | 18 mm reinforced hinge |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Smoke set "S" |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | 20 g tin paste |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Tray for FUTABA 18 SZ |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | DUPLEX MRMP Hall EX |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Partall paste 650 g |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | DUPLEX USB Adapter |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Transmitter Balancer Futaba V |
1 x | Receiver bed (Blue) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Electric rocket starters (6 pcs) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Angle measurer |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Switch Cap L (black) |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | White smoke canister 140 g |
1 x | Angle of incidence meter |
1 x | Blue smoke canister 100 g |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Futaba Radio Case |
1 x | Micro flex hinge (12 uds) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Horn mando long (2 pcs) |
1 x | 6 mm M3 variable horn |
1 x | 6 mm M3 variable inclined horn |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 6 mm aluminium horn with patella |
1 x | EC-Cutter |
1 x | 1/10 Pilot "Jack" |
1 x | 100g Flux Paste for Silver Solder |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | Piloto JET 1:3,5 |
1 x | Receiver RSF08SB comatible FUTABA |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Digital precision scale up to 2000 g |
1 x | Receiver R7008SB FASSTest |
1 x | Receiver R7008HV comatible FUTABA |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Horn DUBRO 1/2A |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Piloto jet 130 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 2,5x60 mm allen screwdriver |
|
9,874.37EUR |