1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Battery Lipo GENS 4000 mAh 7.4v TX |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
1 x | Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | One touch canopy lock |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | SUS wire 3m (nylon coated) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Covered closure or fairings |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | T-Connector 4.0 mm x 1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Propeller POWER-PROP 14x9 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Motor DLE 200cc Std |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Propeller POWER-PROP 13x9 |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Motor A2212/13T |
1 x | Extension lead 15 cm Multiplex |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Lipo GENS 2200 mAh 2s 7.4v 20c Soaring |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
1 x | Motor DLE 430 cc - Paramotors |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | 3l Smoke oil |
1 x | Green smoke canister 65 g |
3 x | Red smoke canister 140 g |
1 x | B4-0 rocket charges (6 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Remote electric ignition system |
1 x | Green smoke canister 140 g |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Smoke set "Glider" |
1 x | Electric rocket starters (6 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | USB Adaptor OPTronics |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Motor DLE 170 M- Paramotors |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Crimping tool |
2 x | 25 mm Sandpaper file |
1 x | Cut tube |
2 x | Dremel 3000 130W |
2 x | Ball Link Plier |
1 x | 100g Flux Paste for Silver Solder |
2 x | Ball Link Plier |
2 x | Dust collector for mould cleaning |
2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
2 x | Crimping tool |
2 x | 3,0x60 mm allen screwdriver |
2 x | 2,5x60 mm allen screwdriver |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
3 x | Copier 5x20 cm pcs |
1 x | 1,5x50 mm allen screwdriver |
2 x | 2,0x50 mm allen screwdriver |
1 x | |
2 x | Dremel PERMAGRIT thin lime |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
3 x | Copier 2x20 cm pcs |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | |
2 x | Concave-Convex sandpaper file 13 mm |
2 x | Boxed KIT OF 7 Rotary Burrs FINE |
3 x | Digital scale up to 40 kg |
2 x | Fresa corte diamante Ø 2.3mm (bola) |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
3 x | Digital precision scale up to 2000 g |
1 x | Smoke set "S" |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Red smoke canister 100 g |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | OS 40-FG 4T Motor |
1 x | 24x10 prop Super Silence |
2 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | PYRO 800-48 Long Axi |
1 x | Axle for AXI 28269/xx motors |
1 x | Axle for AXI 4120/xx motors |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | White smoke canister 65 g |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Rocket D3-P |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Glow starter with charger 230v |
1 x | Oracover light Grey 2m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Fundas para el transporte F3A alas |
1 x | KIRA 600-17 |
1 x | PYRO 750-50L |
1 x | PYRO 800-40 Long Axi |
2 x | Propeller Pleg CAM Carbon 12x11 |
2 x | Cooler motor type 150 |
2 x | Central support Speed 600 |
2 x | Propeller Pleg CAM Carbon 10x8 |
2 x | Propeller Pleg CAM Carbon 10x7 |
2 x | Propeller Pleg CAM Carbon 13x11 |
2 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Frontal support Speed 600 |
1 x | Frontal support Speed 280 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Vacuum pump 12 CFM |
1 x | Hot Glue Stick BLACK |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Propeller diller for DLE170 |
1 x | MPX plug mold V1 |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Screwdriver for Torx® TX6 |
1 x | Mold plugs XT-30 |
1 x | Z Bender - S Type Tool |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Sealing Iron STANDARD |
1 x | |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | KIRA 500-30 6,7:1 |
1 x | KIRA 480-43 5,2:1 |
1 x | KONDOR 15-92 |
1 x | PYRO 700-56L |
1 x | KIRA 500-36 6,7:1 |
1 x | KIRA 600-30 6,7:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | PYRO 750-50L Competition |
1 x | Size "M" motor holder for class 400 |
1 x | Motor mount for 1 m models |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Motor mount M |
1 x | Fiberglass motor-holder for electric motors |
1 x | Spinner NUT M10x1 |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 14x8 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor holder AXI |
1 x | Bearings for motor HACKER C50 |
1 x | Electric coversion set |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | A50 Motor Mount Alu complete set |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Motor Mount for Multiplex FunJet |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Size "L" motor holder for class 600 |
1 x | Spinner NUT 1/4x28 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Spinner NUT M5 |
1 x | Spinner NUT M6 |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Spinner NUT M6 |
1 x | Cooler motor type 280 |
1 x | Hacker A30-S Radial Set |
1 x | |
1 x | Fan for A60 |
1 x | PHASOR RACE 2035/4100 1D |
1 x | Starter EM Gear Power 250 |
1 x | Sandpaper file 13 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Universal Filter |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Receiver bed (Blue) |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Spinner NUT M5 |
1 x | Motor mount for 1200 mm models |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Frontal support Speed 400/480 |
1 x | Size "M" motor holder for class 600 |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
1 x | Motor holder for AC 28/7 |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Fiberglass motor-holder for electric motors |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Cooler motor type 300 |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | |
1 x | Central support Speed 280 |
1 x | PHASOR RACE 2035/2100 2D |
1 x | 10 mm gas motor standoff |
1 x | Indoor motor holder |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | Metalic motor holder for class 550-600 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Propeller Pleg CAM Carbon 13x10 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 11x5 |
2 x | Starter Sullivan-STAR 601 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Tube bender |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Handle for PERMAGRIT lime |
1 x | Precision wrench L100 mm |
1 x | Heli digital angle measurer |
1 x | Heli blades angle measurer |
1 x | Sealing Iron Sleeve STD |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Mini Lock Grips 2PCS |
1 x | Tool for entel |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Mold plugs XT-90 |
1 x | Steel brush wheel with 2.35mm |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Mini-handed clamp |
1 x | Screwdriver for Torx® TX8 |
1 x | Hot Glue Stick RED |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Heat Seal Iron |
1 x | Starter EM Gear Power 80 |
1 x | VTX 477 Carbon Rotorblade |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Dean-T Plug Mold |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Mini Infrared Thermomiter |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
|
30,470.72EUR |