| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 4 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 3 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 4 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 4 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 3 x | Straightened threaded rod M3 - 1m |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 2 x | Brass rod Ø 0.8 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 2 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 2 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 2 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 4 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Motor A2212/13T |
| 1 x | Strip 2,5x1,25x330 mm |
| 3 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 3 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 2 x | Round Rod 6,0x1000 mm |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | Strip 2,0x2,0x330 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 3 x | Round Rod 1,5x1000 mm |
| 2 x | Round Rod 2,0x1000 mm |
| 4 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | CC 03 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | TrainerCord (master-learner) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Circlick securite |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | CC 02 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 05 |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 3 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Motor NGH GF30 |
| 1 x | Canister combo DLE 55 cc |
| 1 x | Motor NGH GT-9 V2 |
| 1 x | Hub DLE 30 |
| 1 x | Angle support XT60 conector |
| 1 x | Jet Afterburner Simulator NF-Jet2 |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | NF-3 RC set |
| 1 x | Jet Afterburner Simulator NF-Jet1RY Set |
| 1 x | Motor DLE 20 cc |
| 1 x | Exhaust gasket DA50R DA100 DA200 |
| 1 x | Flat version carb bend for the ZG 62 |
| 1 x | Crankcase gasket DA 170 |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Exhaust gasket DA-60/120 |
| 1 x | ZENOAH ZG26 SCM Marine Engine |
| 1 x | NF-3X-80 liner Kit |
| 1 x | Motor DLE 40 cc Twin |
| 1 x | Cylinder ZG 26SC/SLH |
| 1 x | NF-1 RC set |
| 1 x | Rear bearing for motor 35/40 cc |
| 1 x | Motor EME 60 cc |
| 1 x | Motor DA 150 |
| 1 x | Motor EME 70 cc |
| 1 x | Motor DA 170 |
| 1 x | Motor Moki S 250 cc 5 cyl with autostarter |
| 1 x | Carburator Moki S400 |
| 1 x | CDI EME 55/60 cc |
| 2 x | Piston ring EME 35cc |
| 2 x | Piñon motor autostarter 60cc |
| 1 x | Flange gasket MOKI carburetor |
| 1 x | Motor DA 50-R |
| 1 x | Moki Carburetor Throttle Arm with Extension |
| 1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
| 3 x | Motor EME 35 cc with electric starter |
| 2 x | Motor EME 35 cc |
| 1 x | Piston EME 35cc |
| 2 x | Baffles for Radial Moki S180/320 mm |
| 1 x | Propeller hub EME 60cc |
| 2 x | Air filter MOKI |
| 1 x | Carburator gasket MOKI |
| 1 x | Strip 1,5x1,5x330 mm |
| 2 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | MAMBO 17 |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | MZ-12, 6 Channel HoTT |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | Motor holder for AC 28/7 |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Cooler motor type 400 |
| 1 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | Receiver replacement antenna, approx. 15 |
| 1 x | TMM 2512-3S heli |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Servo Arm aluminium ALU-STAR |
| 1 x | Canopy Latch |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Spinner fixed propeller 42 mm / 5,0 mm |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 1 x | Blade holder center |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | DJI FPV Combo |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Tape GFK 25 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Green smoke canister 140 g |
| 1 x | PowerPack 2.5X2 PRO |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | Head runner |
| 1 x | Battery bed V2_M (black) |
| 1 x | Nut M2 |
| 1 x | Aluminium battery holder red |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | MAX BEC 2D plus EX |
| 1 x | USB HLS prog. interface |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | MAX BEC |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Female connector for 6 pines AWG |
| 1 x | PSC 6 |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Intake tube ZG 74/80, DA85, VM 170-420 with special screws |
| 1 x | Ignition module ZG 38/S/SC |
| 1 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | RM-85FSI 4-stroke inline gasoline engine |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
| 1 x | BULLIT Wing 840 mm |
| 1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | Carburator Moki S250 |
| 1 x | Moki Pushrod S250 (1 pcs) |
| 1 x | Motor Moki S 500 cc 5 cylinders |
| 1 x | Ciano KAVAN Medium 20g |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Debonder CA 20g |
| 1 x | Ignition for ZG 20/26 |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 1 x | Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole |
| 1 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
| 1 x | Gasket, cylinder ZG 20 |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
| 1 x | Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH |
| 1 x | |
| 1 x | Lense for Spotlights, 20mm |
| 1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
| 1 x | Ignition RM-25V |
| 1 x | ZENOAH ZG 26SC with magneto ignition |
| 1 x | ZENOAH/ZG 20cc |
| 1 x | SkyMaxx 1.550 mm (kit) |
| 1 x | PARAGON Trainer 46-55 1580 mm |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | Motor Moki 180 |
| 1 x | Baffles for Radial Moki S250/330 mm |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
| 1 x | Selfstarr EME35 |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Savox Brushless Servo SB-2271SG |
| 1 x | Savox Brushless Servo SC-1267 SG |
| 1 x | Battery charging cable XT60 |
| 1 x | Short Switch On/Off micro |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | MB-339 Aermachi 84" ARF c/retractil electric |
| 1 x | Servo DITEX EL0510M |
| 1 x | One Way bearing for EME35 starkit with key |
| 1 x | Motor EME 70 cc with autostarter |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Servo holder for retract |
| 1 x | Pitts Mufflers EME 35 cc |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Pitts Mufflers EME 55/60 cc |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | One Way bearing for EME55 starkit with key |
| 1 x | Servo mounting frame SV-1260MG |
 |
| 42,795.85EUR |
