3 x | Glases Stratus |
2 x | Glases Nimbus "Black" |
2 x | Glases Flitemaster |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Nimbus |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | Glases Aspen |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Glases Ace |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Cable control set |
1 x | Horn with ball 40x30 |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | RH long aluminium horn (2pcs) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | 20 mm carbon horn |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Field folding model stand |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Angle of incidence meter |
1 x | WingFix ULTRA Black Edition |
1 x | Ferrita 17x10x6.5 mm |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | 30 cm DEANS female connector |
1 x | Glases Innovation Plus |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Spinner INOVA 63 mm White |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Charger LiPo Charger4 |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Decorative caps, multicoloured, short |
1 x | Angle support XT60 conector |
1 x | Support ECU Xicoy X-45 |
1 x | Support pump Xicoy X45 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | 6 mm M3 variable inclined horn |
1 x | Horn with ball 55x40 |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Long horn 50x26 |
|
1,816.32EUR |