2 x | Spikes Band (5 m) |
4 x | Tape GFK 25 mm |
5 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Cinta Goldfix 1m |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
2 x | Marker ties (20 pcs) |
3 x | SE Ring 200 mm (2 pcs) |
3 x | SE Ring 450 mm (2 pcs) |
4 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
4 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
4 x | SE Ring 250 mm (2 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Motor A2212/13T |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | SE Ring 300 mm (2 pcs) |
5 x | Ring 320 mm length (5 pcs) |
3 x | SE Ring 240 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
2 x | Tape GFK 50 mm |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | SE Ring 330 mm (4 pcs) |
2 x | SE Ring 350 mm (2 pcs) |
4 x | SE Ring 360 mm (2 pcs) |
2 x | Tape GFK 38 mm |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Cable with accesories |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | 20 mm carbon horn |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Glases Aspen |
1 x | Glases Flitemaster |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | |
2 x | Foil for sticking flaps and ailerons |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Propeller balancer |
1 x | Ferrita 27x14x7 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Ball Link Plier |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Insulator block ZG 38/S/SC |
1 x | One Way bearing for EME55 starkit with key |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Motor NGH GF30 |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | Low speed needle DA-50R/100I |
1 x | Motor EME 35 cc with electric starter |
1 x | Motor EME 70 cc with autostarter |
1 x | Piston ring for DA-50R and DA-100 |
1 x | L ELBOW 90º ø 25 mm |
1 x | 90° TUBE-ANGLE Ø 25 mm |
1 x | Valvoline SynPower 2T, 1 Litre |
1 x | Canister combo DLE 111 cc |
1 x | Rear bearing for motor 35/40 cc |
1 x | Escape Moki 100 BVT |
1 x | Hub propeller DLE 111 V3/120 |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Silencer with rear exhaust DA-120 |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | 6 mm M3 variable inclined horn |
1 x | Micro control horn T2 Ø 1 |
1 x | Horn mando small (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Long horn 50x26 |
2 x | Rudder forward 80x28 "type Kato" |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Control horn long w/ball |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Horn DUBRO 1/2A |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Long adjustable control horn 3x34 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Fiberglass plate 620x540x2,0 mm |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Glases Nimbus |
1 x | Release film 100 cm x 50 m |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Glases Nimbus "Black" |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Field folding model stand |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Tray for FUTABA 18 SZ |
1 x | White aluminium 230 mm landing gear |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Canister combo DLE 55 cc |
1 x | Reed valve for DA-60/70 |
1 x | Prop hub screw DA85/100/120 & VM170/200/210 |
1 x | Steel conrod DA-50R and DA-60 |
1 x | Rear crankcase DA-50R |
1 x | Reed valve petal for DA 35/50R/100l carburator |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Motor EME 35 cc |
1 x | Piñon motor autostarter 35cc |
1 x | Prop washer DA-50R/60/70 |
1 x | Motor DLE 65 cc |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
|
10,406.34EUR |