2 x | Beech dowels 2.0 x 1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 498x247x2.0 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | A/C quality beech plywood 498x247x1.2 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Motor A2212/13T |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Silent-blocks DLE 170M |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Small Crow DLE-170M |
1 x | Motor DLE 200cc Std |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 20 mm carbon horn |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn with ball 55x40 |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Ballast 700gr OPALE |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Servo MKS HV6130 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | DIVA cabin cruiser |
1 x | Servo HITEC HS-5087 MH |
1 x | T- Fittings blue color (2pcs) |
1 x | PS-050 TONEGAWA Servo |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Fuel Fittings-Gold |
1 x | Hitec 52 mm servo arm |
1 x | DLE 55 carburetor |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Servo HITEC HS-485 HB |
1 x | T-Hose connector 4-4-4mm |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | 1000 ccm gasoline fuel tank |
1 x | MIG 29 3D RTF, Servo |
1 x | SSPS105 Super Hi-Power servo |
1 x | SAITO FG-36 carburetor |
1 x | Fast attachment for servos (25 pcs) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Aqua RACE 70 (without motor) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | EME 55 cc carburetor WALBRO |
1 x | Servo HITEC D625 MW |
|
10,217.52EUR |