3 x | Beech dowels 2.0 x 1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Motor A2212/13T |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Silent-blocks DLE 170M |
1 x | Motor DLE 430 cc - Paramotors |
2 x | Small Crow DLE-170M |
1 x | Motor DLE 200cc Std |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 20 mm carbon horn |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn 5/10 with M2 Bearing |
3 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn with ball 55x40 |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Horn 6/35 with M3 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Ballast 700gr OPALE |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Servo MKS HV6130 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | DIVA cabin cruiser |
1 x | Servo HITEC HS-5087 MH |
1 x | T- Fittings blue color (2pcs) |
1 x | PS-050 TONEGAWA Servo |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Fuel Fittings-Gold |
1 x | Hitec 52 mm servo arm |
1 x | DLE 55 carburetor |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Servo HITEC HS-485 HB |
1 x | T-Hose connector 4-4-4mm |
1 x | Servo case HS-225MG/225BB/5245MG |
2 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | 1000 ccm gasoline fuel tank |
1 x | MIG 29 3D RTF, Servo |
1 x | SSPS105 Super Hi-Power servo |
1 x | SAITO FG-36 carburetor |
1 x | Fast attachment for servos (25 pcs) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Aqua RACE 70 (without motor) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 54 mm Futaba servo arm tandem with ball link |
2 x | EME 55 cc carburetor WALBRO |
1 x | Servo HITEC D625 MW |
1 x | 28 mm turnbuckle |
1 x | 38 mm fenders (10 pcs) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | 45 mm flag mast |
1 x | 57 mm micro-mini servo cover |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | 1/6 Pilot "Tony" |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Decorative caps, multicoloured |
1 x | Support pump Xicoy X45 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 1/10 Pilot "Jimmy" |
1 x | 18m Fitting barb |
1 x | "Taxi Tank" Fuel Tank |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Spring Clip Ø25 mm |
1 x | Recess mount-rem. glow plug set |
1 x | Spring clamp for tube Ø50 mm |
1 x | DLE 30 complete electronic ignition |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Distanzstück motor OS 120 AX |
1 x | USB programador GO servos |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Cable control set |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Horn with ball 40x30 |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Big Crow DLE-170M |
1 x | Motor DLE 200cc Premium Muffler |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | ASK 21 6.5m + pylona |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | LO 100 ARC 3.3m |
1 x | ASW 15 5000 mm (Airwold) |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Fox MDM 1 6000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | 6 mm M3 variable inclined horn |
1 x | Indoor hinge with servo arm integraded |
1 x | Micro control horn (2 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Long adjustable control horn 3x34 |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Horn mando long (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Small control horn with bearing (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Servo HITEC HS-785 HB |
1 x | Fuel tank 1500ml (50oz) |
1 x | Gear set HITEC HS-65 HB |
1 x | Quick hose connector 4-3 mm |
1 x | Support 45% Hopper JetsMunt |
1 x | La Capitania di Venetia 1:50 |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller) |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | Servo DITEX TD2612S |
1 x | Quick hose connector 6-6 mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Servo HITEC HS-645 MG |
1 x | Servo HITEC HS-5685MH |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Servo HITEC HS-7975 TG |
1 x | Hose clips 6 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Reed valve for DA 50-R |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo HITEC HS-7245MH |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
![](images/pixel_black.gif) |
25,828.82EUR |