| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Dust collector for mould cleaning |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Digital scale up to 40 kg |
| 1 x | Xplorer3 anemometro |
| 1 x | Xplorer4 anemometro |
| 2 x | Hot Glue Stick BLACK |
| 1 x | Ball Link Plier |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Z Bender - S Type Tool |
| 1 x | |
| 1 x | Crimping tool |
| 3 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Vacuum pump P1-N |
| 1 x | Xplorer2 anemometro |
| 1 x | Hot Glue Stick RED |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Xplorer1 anemometro |
| 1 x | Vacuum pump 12 CFM |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Cut tube |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 450 mm (2 pcs) |
| 2 x | Foil for sticking flaps and ailerons |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Spikes Band (5 m) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Tape GFK 38 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | Tape GFK 50 mm |
| 1 x | Interface Realflight Simulator |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | EasyFLY Addon |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | 20 g tin paste |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Support pump Xicoy X45 |
| 3 x | Z Bender - S Type Tool |
| 1 x | Tool for entel |
| 1 x | Fresa corte diamante Ø 2.7mm (bola) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Rubber Insert soft, 1 Pcs. |
| 1 x | Ball Link Plier |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Crimping tool |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Pump hose (Ø 6/8 mm) transparent |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Piloto jet 130 mm |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 2 x | Female connector for 10 pines AWG |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | EWC3 100 cm wing connector |
| 2 x | Male connector for 6 pines AWG |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Fundas para el transporte F3A alas |
| 1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | ZEUS F3A 2m |
| 1 x | Connector CAN 15 |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | VBar Control RX-Satellite |
| 1 x | VBar Control Touch, midnight black |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | Interruptor RX/Batterie |
| 1 x | FX three-position switched channel, long |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | Porpeller HUNTER 400 |
| 1 x | Propeller electric carbon 8.5x7 |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | SCHARNHORST accessories |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Gates hinge |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Motor Scorpion HKIII 4035-560 Kv |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | Male connector for 16 pines AWG |
| 1 x | Long Switch On/Off micro |
| 1 x | Male connector for 20 pines AWG |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | EWC3 40 cm wing connector |
| 1 x | JETImodel DPS 40 |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
| 1 x | DC24 II Transmitter case insert |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | Propeller APC 11x4.5 Electric Pusher |
| 1 x | Propeller APC 11x7 Glow/Gas |
| 1 x | Propeller APC 12x4.5 MR Electric Pusher |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | Propeller APC 12x3.8 SF |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | ProgBox PRO LCD Hobbywing |
| 1 x | SAVAGE Max Red 1080 mm |
| 1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
 |
| 10,891.73EUR |
