2 x | Silent-blocks DLE 170M |
1 x | Motor DLE 200cc Std |
1 x | Motor DLE 170 M- Paramotors |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | 500 ml sealer (DOPE) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | TrainerCord (master-learner) |
2 x | CM-3 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Spinner plastic white fixed propeller 42 mm |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Crimping tool |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Towing hook |
1 x | Spinner NUT M4 |
2 x | Spinner NUT M8x1,25 |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | 20 g tin paste |
1 x | Dust collector for mould cleaning |
1 x | Spray Graphit 33 |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Screwdriver for Torx® TX6 |
1 x | Horn 5/10 with M2 Bearing |
1 x | Adapter lead MPX/XT60 |
1 x | 1000 ml sealer (DOPE) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Horn 5/15 with M2 Bearing |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Extra long horn 60x30 |
1 x | Stickers-digit for marking |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | Blind nut M5 (10 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Ball Link Plier |
1 x | Hot Glue Stick BLACK |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | 12 mm floating pad (49 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Tow hook for tug |
3 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Antonov AN2 Scale 1/6 - 3m |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | 42 mm white plastic spinner for fixed propeller |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | 6 mm M3 variable horn |
1 x | CC 01 |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | MPX-Dean "T" Adapter |
1 x | 30 cm BEC cable (female) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Conector MT-60 (pair) |
1 x | Vasa model Catapult |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Bungee HLG Premium |
1 x | Conector Servo female 4 pines |
1 x | 1/4 Pilot "Heidi" |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Decorative caps, multicoloured |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | 30 cm DEANS female connector |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | 34 mm Alu spinner 4 mm pleg. propeller |
1 x | 13 mm wing servo holder |
2 x | Avia (Top Model) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Spinner NUT M6 |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | DPSI Ampere battery backer |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | JETImodel SINGLE BEC |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Aluminium servo arm (2 uds) |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Blade holder center |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | IKARUS plane |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | 28 mm tailwheel unit |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Lock nut M4 (10 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Hitec 30 mm servo rounded arm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Blind nut M4 (10 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Servo BMS-4112 |
1 x | Spinner NUT 1/4x28 |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Astra (Top Model) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | 18 mm wing servo holder |
1 x | SERVO HOLDER |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | BULLIT Wing 1095 mm |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Astra wing Joinner (Top Model) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Servo BLS-M55B 61.2kg |
1 x | Bidule 111 3000 mm Canopy |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Spare white 36-38 mm spinner |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Blind nut M2 (10 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Spray adhesive AEROFIX 2 |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | Servoarm Aluminium SH-82 |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Horns indoor |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Jeti Black cap |
1 x | Hobbylite Filler, Balsa colour |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Head spacer |
1 x | Z Spinner (CN) 38mm |
1 x | 25 mm carbon servo arm |
1 x | Servo SAVOX SV-1270 TG |
1 x | Spare white 38-45 mm spinner |
1 x | Servo SAVOX SA-1258 TG |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Z Spinner (CN) 35mm |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
|
12,509.20EUR |