| 2 x | Camara 800 TVL CMOS para FPV |
| 1 x | Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena |
| 1 x | Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m |
| 2 x | Fibra carbono tela 160g/m2 127 cm x 1 m |
| 1 x | Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 5 m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs) |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m |
| 1 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos |
| 2 x | Motor DLE 430 cc - Paramotores |
| 1 x | Helice FALCON 32,5x11 PUSHER Carbono |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs) |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs) |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 5 m |
| 1 x | Fibra carbono "MANGA" 12k 170 mm x 5 m |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Bascula precision 0.1-2000 g |
| 1 x | Anemometro Xplorer3 |
| 2 x | Aceite para Bomba Vacio (1 litro) |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 2 x | Anemometro Xplorer1 |
| 1 x | Antena Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Autoarranque DLE 85/111/120 (motor incluido) |
| 1 x | Anemometro Xplorer2 |
| 1 x | Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs) |
| 2 x | Alicate para "Ball-Link" |
| 2 x | Anemometro Xplorer4 |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Batería Sanyo Eneloop AAA 1,2 V 800 mAh |
| 1 x | Paracaidas BACKUP X100 |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Ballast 700gr OPALE |
| 1 x | Paramotor BackPack XXS (sin accesorios) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 3 x | Manga viento Ozone L -1200 mm |
| 2 x | Para-RC Mix |
| 1 x | Mochila OPALE paramodels |
| 1 x | Paracaidas rescate "RC-Evo-Cross" |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 2 x | Piloto LUCAS ARTF |
| 1 x | Motorización Trike XL (motor+regulador+helice) |
| 1 x | Destornillador allen 1,5x50 mm molibdeno |
| 1 x | Prolongador cable servo 0,14 PVC, conector ZH micro |
| 1 x | Varilla carbono 2.5 mmx1000 mm |
| 1 x | Horn de mando 5/20 con rótula M2 |
| 1 x | Gancho de remolque hasta 3m |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Soporte Filtro FESTO |
| 1 x | Plancha carbono 350x150x3.0 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 10 m |
| 1 x | Fibra carbono tela 240g/m2 100 cm x 2 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 3 m |
| 1 x | Plancha ABS 500 x 400 x 2,0 mm (blanco) |
| 1 x | Film perforado 100 cm / 20 m |
| 1 x | Film perforado 100 cm / 10 m |
| 1 x | Plancha carbono 550x350x1.0 mm ECOTECH |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Film perforado 100 cm / 50 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m |
| 1 x | Peel Ply liso 64 g/m2 150 cm x 10 m |
| 1 x | Fibra de vidrio 49 g/m² (1,27 x 20m) |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Motor DLE 200cc Std |
| 1 x | Fibra Vidrio 425 g/m² Aero (10m x 1m) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Fibra de vidrio 49 g/m² (1,27 x 10m) |
| 1 x | Fibra Vidrio 390 g/m² Aero (10m x 1m) |
| 1 x | Fibra vidrio 80g/m2 (100cm x 1m) cruzada |
| 1 x | Plancha PVC 320 x 194 x 0,23 mm (marrón) |
| 1 x | Hoja Depron Aero 1250x800x3 mm |
| 1 x | Plancha estireno 320x120x0.5 mm |
| 1 x | Plancha termoformable 0,5 mm (0,02") DIN A4 |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Tapon rebosadero negro |
| 1 x | Brazo servo aluminio 15-10 mm HITEC |
| 1 x | Plancha de balsa 4,0x100x1000 mm |
| 1 x | Plancha de balsa 5,0x100x1000 mm |
| 1 x | Listón de CAOBA 1,5x1,5x1000 mm |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Fundas alas/cola ODYSSEY |
| 1 x | Listón de BALSA 3,0x3,0x1000 mm |
| 1 x | Listón de BALSA 5,0x5,0x1000 mm |
| 1 x | Tapon rebosadero azul |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Salida para cables 41x5,5 mm (2 pcs) |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Servo MKS HV747 |
| 1 x | Servo TONEGAWA PS-050 |
| 1 x | Listón de NOGAL 1,5x1,5x1000 mm |
| 1 x | Rótula metálica M2/2 azul (2 pcs) |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Tornillo Servos M3x16 aluminio anodizado rojo (4 pcs) |
| 1 x | Bayoneta de carbono cuadrada 5x5x220 mm |
| 1 x | Liston de BALSA 10 x 10 x 1000 mm |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Captador RCEXL para DA |
| 1 x | PCM - Circuito protección bateria on-board 22.2v 6S |
| 1 x | Tuerca autoempotrable M8 (10 pcs) |
| 1 x | Plancha de balsa 1,5x100x1000 mm |
| 1 x | Plancha de balsa 3,0x100x1000 mm |
| 1 x | Plancha contrachapado Abedul 600x300x4,0 mm |
| 1 x | Listón triangular de BALSA 8x8x1000 mm |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | Batería Panasonic Eneloop AA 1,2 V 1900 mAh |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Plancha contrachapado Abedul 600x300x2,0 mm |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Bayoneta aluminio/strongal D35 mm/1 m |
| 1 x | Conector MR30 (macho) |
| 1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | Soporte Guia Antena doble |
| 1 x | Fundas alas/cola ASPIRE |
| 1 x | Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs) |
| 1 x | USB programador GO servos |
| 1 x | Plancha de balsa 1,0x100x1000 mm |
| 1 x | Listón de CAOBA 2,0x2,0x1000 mm |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | Plancha contrachapado Abedul 600x300x4,0 mm |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Acumulador polvo para limpieza moldes |
| 1 x | Varilla carbono 10 mm x 1000 mm |
| 1 x | Tornillo allen M3x9 mm (4 pcs) |
| 1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
| 1 x | Servo MKS HBL380 |
| 1 x | Manga viento Ozone S - 700 mm |
| 1 x | Piñones servo MICRO BB |
| 1 x | Brazo servo aluminio V2-Futaba 1,0" M3 rojo |
| 1 x | Brazo servo aluminio V2-JR 1,5" M3 gold |
| 1 x | Brazo servo aluminio V1-Futaba 1,0" M2 rojo |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Piloto MAX ARTF |
| 1 x | Bancada servo SAVOX SV-1260MG |
 |
| 25,744.96EUR |
