2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Short ball link M2 (6 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Digital scale up to 40 kg |
2 x | |
1 x | EC-Cutter |
1 x | 1,5x50 mm allen screwdriver |
1 x | Dremel 3000 130W |
1 x | Crimping tool |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 80 mm rods set for direction control |
1 x | 140 mm rods set for direction control |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Allen wheel collar M4x4 |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | 45 mm rods set for direction control |
1 x | Canopy Latch |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Allen wheel collar M3x5 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | PIX Hawk with accesories |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Blades 330mm |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Hot Glue Stick RED |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Tube bender |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Welder 100W/200V |
2 x | Pushrod greyline 3/2 with coupler M2 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Field folding model stand |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Lense for Spotlights, 20mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Tip wing protector 30x10 (2 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Hot Glue Stick BLACK |
1 x | Copier 2x20 cm pcs |
1 x | Cut tube |
1 x | Vacuum pump 12 CFM |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Starter EM Gear Power 80 |
1 x | Snap long M2 (10 uds) |
1 x | Screwdriver for Torx® TX8 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | 1/7 Pilot "Japanese" |
1 x | 1/6 Pilot "John" |
2 x | Servo TOPMODEL DS9010 T |
1 x | Servo TOPMODEL S7520 MG |
2 x | 90x75 mm standart servo cover |
1 x | Servo TOPMODEL DS1413 T |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 1/12 Pilot "Cougar" |
1 x | 1/10 Pilot "Jimmy" |
1 x | 1/6 Pilot "Tony" |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | 50x45 mm micro-mini servo cover |
3 x | 13 mm wing servo holder |
3 x | 57 mm micro-mini servo cover |
3 x | 18 mm wing servo holder |
1 x | 11 mm wing servo holder |
2 x | Servo TOPMODEL STANDARD S3217 |
3 x | 65 mm mini servo cover |
3 x | 58 mm micro servo cover |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | 10 mm gas motor standoff |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium ignition bad (red) |
1 x | 50 mm gas motor standoff |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Optotronix Aurora Plug |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | LED wire (green - 2pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | BULLIT Wing 1095 mm |
1 x | Astra (Top Model) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | EWC3 40 cm wing connector |
1 x | EWC6 40 cm wing connector |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | VBar Control RX-Satellite |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | VBar Control Touch, midnight black |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | LOGO 600 SX (kit) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | LED wire (blue - 2pcs) |
1 x | SKY MASTER 3.000 mm ARF |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | LED blink wire flashing (blue - 2pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | ARTIST 1.560 mm |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Electric spoiler 185 mm (2 pcs) |
2 x | 90x60 mm standart servo cover |
1 x | Support pumb/filter Xicoy X45 |
1 x | Servo HITEC HS-55 |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo HITEC HS-53 |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC D625 MW |
1 x | Servo TT ACE SHV 1504 MG |
1 x | Servo HITEC HS-485 HB |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-45 HB |
1 x | Servo HS-5565MH High Voltage |
1 x | Servo HITEC D645 MW |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Servo DITEX TD2612S |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HITEC D951 TW |
|
9,988.32EUR |