2 x | PPM Encoder Module |
1 x | PIX Hawk with accesories |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Tube Pitot to PIXHAWK |
1 x | 2,0x50 mm allen screwdriver |
1 x | Z Bender - S Type Tool |
1 x | Screwdriver for Torx® TX6 |
1 x | Crimping tool |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Hot Glue Stick BLACK |
1 x | Digital precision scale up to 2000 g |
1 x | Vacuum pump 12 CFM |
1 x | Z Bender - S Type Tool |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Ball Link Plier |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Dust collector for mould cleaning |
1 x | Digital scale up to 40 kg |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Crimping tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Starter EM Gear Power 80 |
1 x | |
1 x | Vacuum pump P1-N |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Ferrita con funda |
3 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Ferrita 27x14x7 mm |
2 x | Spray Graphit 33 |
1 x | Xplorer1 anemometro |
1 x | Release wax 250ml |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Spray EC Red 400ml |
2 x | Painting GHT Lexan Black 150 ml |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Starter EM Gear Power 250 |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Resistor 3W 5% 2R2 |
1 x | Resistor 3W 5% OR82 |
1 x | Landing lights 18 mm (0.71in) |
1 x | Hot Glue Stick GREEN |
1 x | NF-3 RC set |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Spannlack 1000 ml |
1 x | Partall paste 650 g |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1000 ml sealer (DOPE) |
1 x | Paint gun for sprays |
1 x | 20 g tin paste |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Servo MKS HV 777A+ |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | 90x75 mm standart servo cover |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Power supply NT 25 Amp. |
1 x | 18 mm wing servo holder |
1 x | Servo arms set HS-65HB/MG/5065MG |
|
3,717.97EUR |