1 x | Cockpit aluminium closing |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | Canopy Latch |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | 11 mm Rubber pads (14 pcs) |
2 x | 140 mm rods set for direction control |
2 x | Cable grommet 9.5 mm (4 uds) |
1 x | 100 mm rods set for direction control |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Cockpit plastic closing |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
3 x | One touch canopy lock |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Covered closure or fairings |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Propeller balancer |
1 x | WingFix ULTRA Black Edition |
1 x | Medidor ángulos y/o incidencias |
2 x | Angle measurer |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/4 Pilot "Mike" |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Clip fixing for wing (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Ring 320 mm length (5 pcs) |
2 x | Allen wheel collar M3x3 |
1 x | Suncover 100cc Red |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Pushrod octagone 4/3 |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Electronic fog horn |
1 x | Motor ACTRO 50-2-760 |
1 x | Regulador Actro-Marine 80A |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Anchor 50 mm (2 uds) |
1 x | Mounting base Ms 8 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Anchor of tow Met. 60 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Bandera Frankr 4x6 |
1 x | Cockpit aluminium closing 5.4g |
2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Pilot LA 500 |
2 x | LA500 pre-rotation gear hub |
1 x | LA500 pre-rotation gear |
1 x | LA500 freewheel bearing |
1 x | Baal link 4/14/4 (5 pcs) |
2 x | Crystal TX 35.150 Ch 75 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Snap long M2 (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | DIVA cabin cruiser |
1 x | White gelcoat 1 Kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Antenna holder bracket double |
1 x | Crystal Universal RX 35.040 Ch 64 |
2 x | Telemetry SPEKTRUM |
3 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | ESC Actro-Marine 30A |
1 x | Outboard Aqua-Race 60 |
2 x | Propeller RABOESCH M4 70 mm (5 Blades) (Left) |
2 x | Jet Pipe 40N-80N (200 mm) |
3 x | Jet Pipe 160N-250N (120/130 mm) |
2 x | Pendulun "Special" to tank 60g |
2 x | FOD Screen K140G/K180G/K210G |
2 x | Fod Guard 73x32 mm |
1 x | Pipe Jet REVEL titanio/aluminio |
2 x | Jet Pipe for ASPIRE 2m JMF |
1 x | Fod Guard 94x32 mm |
3 x | Smokelance |
3 x | Tailormade cone A-10 Skymaster |
2 x | Variable Flow Smoke Pump System |
2 x | Bluetooth Adapter JET CENTRAL |
2 x | JETCAT ADITIVO ANTIESTATIC 120ml |
1 x | Bidule 55 2460 mm Cabina |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | 10-15mm Servo Arm HITEC |
1 x | Bidule 55 V3 2460 mm |
1 x | SKY MASTER 3.000 mm ARF |
1 x | Support FUEL DOT V3 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support Filtro FESTO |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | FIALA Propeller 28x10 |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | LA500 Blades |
1 x | Piñon motor rotor LA-500 |
1 x | Fishing boat Jule Fischkutter |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Heli blades angle measurer |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Starter EM Gear Power 80 |
1 x | Propeller diller 5/6,3/8/9 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Sealing Iron Profi LCD |
1 x | Starter Sullivan-STAR 601 |
1 x | Screwdriver for Torx® TX8 |
1 x | 90x60 mm standart servo cover |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Swift S1 De-luxe 3.140 mm |
1 x | NoNa BB wheel Ø200x60mm in pair |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support ECU Xicoy X-45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Support Pitot JETI |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Angle support XT60 conector |
1 x | FIALA Propeller 23x8 |
1 x | FIALA Propeller 27x10 |
1 x | FIALA Propeller 25x10 |
1 x | Hopper UAT Sebar 600 ml |
1 x | CESSNA 50E White/Blue |
1 x | Avanti S 1.8m Jet RED Style |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | LA500 rotor head shaft |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Hot Glue Stick GREEN |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Sandpaper file 13 mm |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Steel brush wheel with 2.35mm |
1 x | Heat Seal Iron |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | MPX 8 pins plug mold |
1 x | Mini Infrared Thermomiter |
1 x | Hot Glue Stick BLACK |
1 x | Kwik link unmount tool |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Hot Glue Stick RED |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | MPX plug mold V1 |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Mini Lock Grips 2PCS |
1 x | Mini-handed clamp |
1 x | Precision wrench L100 mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Mold plugs XT-90 |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Heli blades angle measurer |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Mold plugs XT-30 |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Propeller diller for DLE170 |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Field folding model stand |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Surface Indicator Gauge Small |
1 x | FIALA Propeller 23x8 Electric |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | 57 mm micro-mini servo cover |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Servo TOPMODEL S7520 MG |
1 x | Servo TOPMODEL DS9010 T |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
3 x | Fod Guard 94x34 mm |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Hysol Mixing Caps SET with 10 |
1 x | Siesta T tail (Topmodel) |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Servo TOPMODEL DS1413 T |
1 x | SUS wire 3m (nylon coated) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
2 x | METEOR 1.000 mm kit |
1 x | Telemetry JETI |
1 x | Fod Guard 83x32 mm |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
1 x | Circlick securite |
|
23,679.55EUR |