3 x | METEOR 1.000 mm kit |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Motor DLE 200cc Std |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Small Crow DLE-170M |
1 x | PIT (Aero-Naut) |
1 x | Screws flush mount M2 |
1 x | Servo Fork |
1 x | Baering 3x8x4 |
1 x | LA500 freewheel bearing |
1 x | Screw M3x16 |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Epoxy L 40 min. 10 kg (Resin) |
2 x | CA Glue (medium) 20g |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Epoxy 40 min (Resin). 25Kg |
1 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Servo HITEC D-955 TW Titanium |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC D950 TW |
1 x | Servo HITEC HS-5585MH |
1 x | Gear set HITEC HS-81 |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Screws set for Hitec MG arms servo |
1 x | Gear set HITEC HS-56 HB |
1 x | Gear set HITEC HS-311/322/325BB |
4 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
3 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
3 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy 5 min. 200g |
1 x | |
2 x | |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
3 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
3 x | Foaming agent for epoxy resins 200 g |
2 x | Epoxy 10 min 190g |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
3 x | Propeller 8x4,3 SlowFlyer |
3 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
2 x | Cooler motor type 280 |
1 x | Cooler motor type 150 |
4 x | Cooler motor type 300 |
3 x | 76 mm light wheels (2 pcs) |
2 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
3 x | Reductora IPS dual-motor 10,7:1 with spinner |
3 x | Cooler motor type 400 |
2 x | Propeller 3x3 |
3 x | Propeller 11x4,7 SlowFlyer |
4 x | Propeller 10x4,7 SlowFlyer |
1 x | Gear set HITEC D645 MW |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 10-15mm Servo Arm |
1 x | Servo HITEC HS-325 BB |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Servo HITEC D85 MG |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-45 HB |
1 x | Gear set HITEC HS-55 |
1 x | Servo HITEC HS-125 MG |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Servo BMS-4112 |
1 x | Decorative caps, multicoloured |
1 x | Canopy Latch |
1 x | Distanzstück motor OS 120 AX |
1 x | DLE 55 Muffler |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Muffler DLE-120 Left |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Propeller MEJLIK 23x8 CFK |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | ULTRA STICK 10 cc ARF |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Propeller G-Sonic 20x8 |
1 x | Receiver replacement antenna, approx. 85 |
1 x | |
1 x | DLE Ignition 170M |
1 x | Big Crow DLE-170M |
1 x | Propeller POWER-PROP 16x8 |
1 x | Propeller POWER-PROP 11x9 |
1 x | 10x7 tree blades propeller |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Ball joint long |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
2 x | BULLIT Wing 1095 mm |
2 x | BOOMERANG II 40/46 ARF 1.55mm |
1 x | Helice APC 14x4 W |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 12x10 Electric |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Epoxy 40 min (Hardener). 10Kg |
2 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Cyano INSTA - CURE™ (225g) |
2 x | Propeller 8x4 Electric |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
1 x | Blade holder center |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | TRAINER RC Pilot V2 90" w/r ARF |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 10x4.5 MR |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | Cyanocrylate MD GA460 odourless 20g |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Cyano SUPER - GOLD™ (12g) |
2 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | BULLIT Wing 840 mm |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 12x3.8 SF |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Film release agent PVA 25 ml |
2 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
2 x | Retract undercarriage |
1 x | Debonder UN - CURE™ (30g) |
3 x | Propeller 9x7 SlowFlyer |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Extender tip (6 pcs) |
1 x | ExtraCA Top |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Propeller 3x2 |
1 x | 10-15mm Servo Arm HITEC |
|
35,666.16EUR |