1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn with ball 40x30 |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
3 x | Release wax 250ml |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | CA Glue (medium) 20g |
1 x | Foaming agent for epoxy resins 200 g |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | CA Glue fast 20g |
1 x | Pilot "Goose" (Slimline) |
1 x | 800TVL CMOS camera for FPV |
1 x | Paint gun for sprays |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | 5 LiPo XH>EH adapter |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
3 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
4 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
2 x | ABS tube 2.0x1.0x1000 mm |
5 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Motor OS 3820-1200 electric |
1 x | Film release agent PVA 25 ml |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | SBEC 30 D |
1 x | Short Switch On/Off micro |
1 x | MAX BEC 2 |
1 x | |
1 x | SE Ring 400 mm (2 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
2 x | 4 blades set |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Clip fixing for wing (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Epoxy 10 min 190g |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
2 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
4 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
4 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
3 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | A60 Motor Mount Alu complete set |
1 x | Size "M" motor holder for class 400 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Central support Speed 600 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
2 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Sebart 2.2 m WHITE/BLUE (SebART) |
3 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | SLICK 360-A 104" (2640 mm) |
4 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
2 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | A50 Motor Mount Alu complete set |
1 x | Receiver bed (Blue) |
1 x | 10 mm gas motor standoff |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 18,5x12 |
1 x | Propeller CFK 12.75x13 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Landing gear frontal support 25x32x16 |
1 x | SUS wire 3m (nylon coated) |
1 x | Allen wheel collar M4x6 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | 3 blades set |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Pushrod octagone 4/3 |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Propeller CFK 15x16 |
2 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Propeller CFK 14x8 Slim |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Fuselage Autogyro RAINBOW |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Blade Holder Full (4 blades) |
1 x | Covered closure or fairings |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cockpit plastic closing |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | One touch canopy lock |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Blade Holder (3 blades) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Canopy Latch |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | 25x14 4Bl Scale |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | FIALA Propeller 16x6 |
1 x | 17x8 BIELA propeller |
1 x | Propeller POWER-PROP 7x7 |
1 x | HITEC 20 mm servo arm with ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 25 mm servo arm with ball link |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | EDGE 540 1.73m SEAGULL Model |
2 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Propeller MENZ-S 18x10 |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Propeller MENZ-S 17x8 |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Racor 4/3 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Servo FUTABA S 9670 SV |
1 x | Servo MKS HV69 |
1 x | Servo MKS 6100 DS |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Servo BLS-M55B 61.2kg |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | 11 mm wing servo holder |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC D625 MW |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | FIALA Propeller 23x8 |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Servo inverter |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | ULTRA STICK 10 cc ARF |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Propeller APC 14x6 Glow/Gas |
1 x | 29x12 prop Super Silence |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Propeller MENZ-S 18x6 |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | 90x60 mm standart servo cover |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Servo FUTABA BLS 272SV |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | 57 mm micro-mini servo cover |
1 x | 13 mm wing servo holder |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo Mount M (blue) |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Propeller MENZ-S 20x8 |
1 x | FIALA Propeller 26x10 |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 18x8 BIELA propeller |
1 x | 23x10 BIELA propeller |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | 18x10 BIELA pusher propeller |
1 x | 23x8 BIELA propeller |
1 x | FIALA Propeller 22x10 |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | 24x8 BIELA propeller |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Servo safety connector (10 pcs) |
1 x | Servo AN-20 MGBBA |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 20 mm servo arm |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Professional Servo tester |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
3 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | EDGE 540-A 91" (2310 mm) |
2 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | 24x10 prop Super Silence |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Propeller APC 16x10 Glow/Gas |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | Propeller MENZ-S 15x6 |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Propeller MENZ-S 20x12 |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Propeller MENZ-S 17x10 |
1 x | Racor 4/4 mm |
1 x | T-Hose connector 2-2-2 mm |
1 x | Hose stopper 4 mm |
1 x | Quick hose connector 4-3 mm |
1 x | Propeller MENZ-S 20x9 |
1 x | FESTO Blanking plug G1/8 |
1 x | Quick hose connector 3-3 mm |
1 x | FESTO Filter 4 mm |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Propeller MENZ-S 18x8 |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | 25 mm carbon servo arm |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Servo FUTABA SBL 471 SV |
1 x | Futaba 3010 - Gear Set |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Servo MKS HBL380 |
1 x | 65 mm mini servo cover |
1 x | Servo FUTABA BLS 276SV |
1 x | Servo MKS HV6130 |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | 58 mm micro servo cover |
1 x | Servo FUTABA BLS175 SV |
1 x | Alu servo arm double RHINO |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Servo MKS HBL550 |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | Metal gear set for HS81MG/5082MG |
1 x | 90x75 mm standart servo cover |
1 x | Servo MKS 6100 DS |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Servo MKS HV1220 |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Programador FUTABA USB CIU-3 |
1 x | HV6150 Digital Servo |
1 x | Servo GO-09 9g |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Servo HITEC HS-125 MG |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC HS-311 |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | USB programador GO servos |
1 x | Servo HITEC HS-225 BB |
|
48,665.10EUR |